Sculpfun S30 10W vs Sculpfun S9 Laser Engraver
Technical comparison · Diode laser (405–460 nm)
S9 Laser Engraver leads on the available specs (starting with price); S30 10W makes sense only for non-technical reasons (availability, support, ecosystem), or if the missing data matters in your case.
| Parameter |
S30 10W
Sculpfun
F2 · Intermediate
|
S9 Laser Engraver
Sculpfun
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2022 | 2021 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | 599.99 € | 259 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 55.5 × 59.5 × 21 cm | 57 × 60 × 27 cm |
| Weight (kg) | — | 3 kg |
| Work area (mm) | 380 × 385 mm | 410 × 415 mm |
| Power (W) | 84 W | 30 W |
| Voltage (V) | 240 V | — |
| Maximum speed | 25000 mm/min | — |
| Declared precision | 0.005 mm | 0.01 mm |
| Category specs | ||
| Work area (short side) (mm) | 380 mm | 410 mm |
| Rated power (W) | 10 W | 5.5 W |
| Source technology | Diode | Diode |
| Max cut depth per material | — | Wood: 15mm, Acrylic: 10mm |
| Wavelength (nm) | 455 nm | 450 nm |
| Min resolution (µm) | 5 µm | 10 µm |
| Autofocus | False | False |
| Rotary included/compatible | False | False |
| Supported software | LightBurn, Other | LightBurn, Other |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The 32-bit motherboard is fully compatible with LightBurn (including M8 air control) and LaserGRBL. It also supports Bluetooth connectivity and offline printing via SD card. | Fully compatible with LightBurn and LaserGRBL (Windows only), operating via standard GRBL firmware without proprietary restrictions. |
The differences that matter
- Price: S30 10W 599.99 € vs S9 Laser Engraver 259 € — S9 Laser Engraver wins (+132%)
- Work area: S30 10W 380×385 mm vs S9 Laser Engraver 410×415 mm — S9 Laser Engraver wins (+16%)
Which one to choose
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.