Classified as F2 because it is aimed at hobbyists and makers, offering an open structure and moderate power suitable for light engraving and cutting.
MakerSpecs doesn't sell and doesn't show store prices: check the price where you buy.
Paid link: the price for you does not change. Methodology
As an Amazon Associate I earn from qualifying purchases.
| Parameter | Value | Source |
|---|---|---|
| Machine dimensions | 57 × 60 × 27 cm (22.4 × 23.6 × 10.6 in) | manufacturer website |
| Weight | 3.0 kg (6.6 lb) | manufacturer website |
| Work area | 410 × 415 mm (16.1 × 16.3 in) | manufacturer website |
| Declared precision | 0.01 mm | manufacturer website |
| Work area (short side) | 410 mm | Compiled by editorial team |
| Rated power | 5.5 W | Compiled by editorial team |
| Source technology | Diode | Compiled by editorial team |
| Max cut depth per material | Wood: 15mm, Acrylic: 10mm | Compiled by editorial team |
| Wavelength | 450 nm | Compiled by editorial team |
| Min resolution | 10 µm | Compiled by editorial team |
| Autofocus | No | Compiled by editorial team |
| Rotary included/compatible | No | Compiled by editorial team |
| Supported software | LightBurn, Other | Compiled by editorial team |
| Air assist | Optional | Compiled by editorial team |
Fully compatible with LightBurn and LaserGRBL (Windows only), operating via standard GRBL firmware without proprietary restrictions.
Technical data verified on the manufacturer's official website (recording date shown above). Description, editorial notes and translations are written with the help of AI and reviewed by the author before publication: the numbers always come from the cited source. Read the full methodology →
