FoxAlien Masuter Pro vs Proxxon MICRO MF 70/CNC-ready
Technical comparison · CNC milling
Masuter Pro leads on the available specs (starting with work area); MICRO MF 70/CNC-ready makes sense only for non-technical reasons (availability, support, ecosystem), or if the missing data matters in your case.
| Parameter |
Masuter Pro
FoxAlien
F2 · Intermediate
|
MICRO MF 70/CNC-ready
Proxxon
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | ~500–650 € | — |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | — | – × – × 37 cm |
| Weight (kg) | — | 7 kg |
| Work area (mm) | 400 × 400 mm | 150 × 70 mm |
| Z-axis height (mm) | 60 mm | 70 mm |
| Power (W) | 60 W | 100 W |
| Voltage (V) | 12 V | 230 V |
| Maximum speed | — | 20000 rpm |
| Category specs | ||
| Travel X×Y (short side) (mm) | 400 mm | 70 mm |
| Z travel (mm) | 60 mm | 70 mm |
| Min spindle RPM (rpm) | — | 5000 rpm |
| Max spindle RPM (rpm) | 10000 rpm | 20000 rpm |
| Spindle power (W) | — | 100 W |
| Controller | GRBL | — |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | Based on a controller with open GRBL firmware, the machine is natively compatible with major industry software like Candle, Carveco, and Easel. It fully supports LightBurn and LaserGRBL if equipped with an optional laser module. | The machine is sold without a control unit and CNC software, offering maximum architectural freedom. The user must connect the stepper motors (via the three included standard SUB-D 9-pole connectors) to a third-party controller, allowing the use of firmware like GRBL, LinuxCNC, or Mach3 depending on the chosen electronics. |
The differences that matter
- Work area: Masuter Pro 400×400 mm vs MICRO MF 70/CNC-ready 150×70 mm
Which one to choose
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.