Proxxon MICRO MF 70/CNC-ready vs Two Trees TTC450
Technical comparison · CNC milling
TTC450 leads on the available specs (starting with work area); MICRO MF 70/CNC-ready makes sense only for non-technical reasons (availability, support, ecosystem), or if the missing data matters in your case.
| Parameter |
MICRO MF 70/CNC-ready
Proxxon
F2 · Intermediate
|
TTC450
Two Trees
F2 · Intermediate
|
|---|---|---|
| Awards | — | |
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | — | ~280–350 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | – × – × 37 cm | — |
| Weight (kg) | 7 kg | — |
| Work area (mm) | 150 × 70 mm | 460 × 460 mm |
| Z-axis height (mm) | 70 mm | 80 mm |
| Power (W) | 100 W | 72 W |
| Voltage (V) | 230 V | — |
| Maximum speed | 20000 rpm | 800 mm/min |
| Declared precision | — | 0.1 mm |
| Category specs | ||
| Travel X×Y (short side) (mm) | 70 mm | 460 mm |
| Z travel (mm) | 70 mm | 80 mm |
| Workable materials | — | Wood, Plastics, Soft metals, PCB |
| Min spindle RPM (rpm) | 5000 rpm | 8000 rpm |
| Max spindle RPM (rpm) | 20000 rpm | 8000 rpm |
| Spindle power (W) | 100 W | — |
| Controller | — | GRBL |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The machine is sold without a control unit and CNC software, offering maximum architectural freedom. The user must connect the stepper motors (via the three included standard SUB-D 9-pole connectors) to a third-party controller, allowing the use of firmware like GRBL, LinuxCNC, or Mach3 depending on the chosen electronics. | The machine is based on open-source GRBL firmware and is compatible with major industry software, including Easel, Carveco Maker, Fusion360, VCarve, and Candle. Being not cloud-dependent, it allows total local control, supporting standard .nc and G-code files via SD card or USB connection. |
MakerSpecs Awards
MICRO MF 70/CNC-ready
Nessun riconoscimento in questa fascia.
TTC450
Best price Intermediate
The lowest list price among intermediate CNC milling machines: €315. The second cheapest starts at €415. (Excluding manufacturer or retailer discounts.)
How we assign awards →The differences that matter
- Work area: MICRO MF 70/CNC-ready 150×70 mm vs TTC450 460×460 mm
Which one to choose
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.