Creality K1C vs Prusa Research MINI+ Enclosure Bundle
Technical comparison · Fused filament fabrication (FFF/FDM)
Two FDM printers at similar prices but from different generations: the K1C (2024) is CoreXY with a larger build volume, the MINI+ (2020) is Cartesian and more compact. It comes down to how much space and speed you need against €90 less.
| Parameter | ||
|---|---|---|
| Identity | ||
| Launch year | 2024 | 2020 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | 599 € | 509 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 35.5 × 35.5 × 48.2 cm | 38 × 33 × 38 cm |
| Weight (kg) | 12.4 kg | 4.5 kg |
| Work area (mm) | 220 × 220 mm | 180 × 180 mm |
| Z-axis height (mm) | 250 mm | 180 mm |
| Power (W) | 350 W | 150 W |
| Voltage (V) | — | 230 V |
| Maximum speed | 600 mm/s | 200 mm/s |
| Declared precision | 100 μm | 0.05 mm |
| Category specs | ||
| Footprint X×Y (short side) (mm) | 220 mm | 180 mm |
| Build height Z (mm) | 250 mm | 180 mm |
| Kinematics | CoreXY | Cartesian |
| Max nozzle temperature (°C) | 300 °C | 280 °C |
| Max bed temperature (°C) | 100 °C | 100 °C |
| Max print speed (mm/s) | 600 mm/s | 180 mm/s |
| Enclosed chamber | Yes | No |
| Filament sensor | Yes | No |
| Auto bed leveling | Mesh | Mesh |
| Standard nozzle diameter (mm) | 0.4 mm | 0.4 mm |
| Multi-extruder | No | No |
| Native Klipper | Yes | No |
| Input shaper | Yes | Yes |
| Multicolor printing | No | No |
| Multicolor requires accessory | Yes | Yes |
| Max colors | 4 | — |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | Uses Creality Print, an optimized proprietary slicer. Fully compatible with third-party software such as Orca Slicer and PrusaSlicer. | PrusaSlicer, with pre-verified profiles for Input Shaper and Pressure Advance, is the reference software, but the machine accepts standard G-code from any compatible slicer, such as Cura or Simplify3D. Remote management runs through Prusa Connect, via Ethernet or the optional ESP Wi-Fi module. The firmware is open-source and runs on the 32-bit Buddy board, not GRBL, and is OTA-updatable: the Prusa ecosystem provides optimized profiles and regular updates, but doesn't restrict the use of alternative software. |
The differences that matter
- Price: €599 against €509 → the MINI+ costs €90 less.
- Build volume: 220 × 220 × 250 mm against 180 × 180 × 180 mm → the K1C takes wider parts and parts up to 70 mm taller.
- Kinematics and speed: CoreXY up to 600 mm/s against Cartesian up to 180 mm/s (declared figures) → large parts take longer on the MINI+.
- Ecosystem: native Klipper and Creality Print against open-source firmware, PrusaSlicer and Prusa Connect → the choice of software follows the machine.
Which one to choose
Choose K1C if…
you print larger or taller parts and want short print times: CoreXY with a declared speed of up to 600 mm/s, against the MINI+'s Cartesian design. The trade-off is the higher spend and bulk: it weighs 12.4 kg. It runs native Klipper with Creality Print, which works with Orca Slicer and PrusaSlicer.
Choose MINI+ Enclosure Bundle if…
you have little bench space and print small parts: it weighs 4.5 kg and stands 38 cm tall. The firmware is open source on a 32-bit board, remote management goes through Prusa Connect over Ethernet (or Wi-Fi with the optional module), and PrusaSlicer comes with verified profiles. You accept a smaller build volume and a much lower declared speed.
Where to buy
Paid link: the price for you does not change. Methodology
Filaments for these printers
The most chosen spools among the materials both printers can print according to their specifications.
- ELEGOO PLA PLA1.75 mm1 kg Check the price on Amazon →
- Bambu Lab PLA PLA1.75 mm1 kg Check the price on Amazon →
- SUNLU PETG (Polyethylene Terephthalate Glycol) PETG (Polyethylene Terephthalate Glycol)1.75 mm1 kg Check the price on Amazon →
- SUNLU PLA PLA1.75 mm1 kg Check the price on Amazon →
- OVERTURE PETG (Polyethylene Terephthalate Glycol) PETG (Polyethylene Terephthalate Glycol)High speed1.75 mm1 kg Check the price on Amazon →
Paid link: the price for you does not change. Methodology
As an Amazon Associate I earn from qualifying purchases.
MakerSpecs is an independent atlas. We don't sell products: the purchase links are the same as on the two product sheets and don't influence the verdict. The sheets have the complete data.