Sculpfun S10 vs Sculpfun S9 Pro
Technical comparison · Diode laser (405–460 nm)
On paper the Sculpfun S10 and S9 Pro Laser Engraver are the same machine: a bed of about 400 × 400 mm, 10 W optical output, the same stated resolution, the same software. What separates them is the price, by 29 euros.
| Parameter | ||
|---|---|---|
| Identity | ||
| Launch year | 2022 | 2022 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | 469.99 € | 499 € |
| Universal specs | ||
| Weight (kg) | 3.42 kg | 3 kg |
| Work area (mm) | 410 × 400 mm | 400 × 410 mm |
| Power (W) | 36 W | 10 W |
| Voltage (V) | — | 240 V |
| Declared precision | 0.01 mm | 0.01 mm |
| Category specs | ||
| Work area (short side) (mm) | 400 mm | 400 mm |
| Rated power (W) | 10 W | 10 W |
| Source technology | Diode | Diode |
| Max cut depth per material | — | 15mm wood, 10mm acrylic |
| Wavelength (nm) | 455 nm | 450 nm |
| Min resolution (µm) | 10 µm | 10 µm |
| Autofocus | No | No |
| Rotary included/compatible | No | No |
| Passthrough | No | — |
| Supported software | LightBurn, Other | LightBurn, Other |
| Air assist | Optional | — |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | Compatible with major engraving software such as LightBurn and LaserGRBL. It connects via USB port and does not support offline use with SD memory cards. | Compatible with major engraving software like LightBurn and LaserGRBL. It connects via USB and supports files in NC, BMP, JPG, PNG, and DXF formats. |
The differences that matter
- Price 469.99 € against 499 € → a 29-euro gap that does not change the kind of work either machine can do.
Which one to choose
Choose S10 if…
The same desktop engraving for 29 euros less. It has to be tethered to a PC over USB with LightBurn or LaserGRBL and cannot run offline from an SD card: the computer stays on next to the machine for the whole job.
Choose S9 Pro if…
For anyone who wants a cutting reference stated by the manufacturer: up to 15 mm in wood and 10 mm in acrylic, to be read as a limit rather than everyday work. It costs 29 euros more and accepts NC, BMP, JPG, PNG and DXF files.
Where to buy
Paid link: the price for you does not change. Methodology
As an Amazon Associate I earn from qualifying purchases.
MakerSpecs is an independent atlas. We don't sell products: the purchase links are the same as on the two product sheets and don't influence the verdict. The sheets have the complete data.