Genmitsu 3018-PROVer V2 vs Proxxon MICRO MF 70/CNC-ready
Technical comparison · CNC milling
3018-PROVer V2 is the cheapest in its class. 3018-PROVer V2 leads on the available specs (starting with work area); MICRO MF 70/CNC-ready makes sense only for non-technical reasons (availability, support, ecosystem), or if the missing data matters in your case.
| Parameter |
3018-PROVer V2
Genmitsu
F1 · Entry
|
MICRO MF 70/CNC-ready
Proxxon
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Use tier | F1 — Entry | F2 — Intermediate |
| Price | ||
| Price (€) | ~240–300 € | — |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | — | – × – × 37 cm |
| Weight (kg) | — | 7 kg |
| Work area (mm) | 290 × 180 mm | 150 × 70 mm |
| Z-axis height (mm) | 40 mm | 70 mm |
| Power (W) | — | 100 W |
| Voltage (V) | 24 V | 230 V |
| Maximum speed | — | 20000 rpm |
| Category specs | ||
| Travel X×Y (short side) (mm) | 180 mm | 70 mm |
| Z travel (mm) | 40 mm | 70 mm |
| Min spindle RPM (rpm) | — | 5000 rpm |
| Max spindle RPM (rpm) | — | 20000 rpm |
| Spindle power (W) | — | 100 W |
| Controller | GRBL | — |
| 4th axis ready | No | — |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | Based on the open GRBL protocol, it is fully compatible with major CAD/CAM software on the market, such as Easel, Fusion 360, and Carveco Maker. For g-code senders, Universal Gcode Sender (UGS) or Candle can be used. Should you choose to add the laser module, it is also supported for use with LightBurn and LaserGRBL. | The machine is sold without a control unit and CNC software, offering maximum architectural freedom. The user must connect the stepper motors (via the three included standard SUB-D 9-pole connectors) to a third-party controller, allowing the use of firmware like GRBL, LinuxCNC, or Mach3 depending on the chosen electronics. |
The differences that matter
- Work area: 3018-PROVer V2 290×180 mm vs MICRO MF 70/CNC-ready 150×70 mm
Which one to choose
Choose 3018-PROVer V2 if…
you value work area. It is the cheapest in its class.
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.