Elegoo Centauri 2 Combo vs Prusa Research XL
Technical comparison · Fused filament fabrication (FFF/FDM)
One is a four-color multicolor printer, the other a Prusa with a bigger volume and an open ecosystem. The Prusa Research XL has a 300 × 300 mm bed and 330 mm of height, and costs roughly 1700 to 1900 euros.
| Parameter | ||
|---|---|---|
| Identity | ||
| Launch year | — | 2025 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | — | ~1700–1900 € |
| Universal specs | ||
| Work area (mm) | 256 × 256 mm | 300 × 300 mm |
| Z-axis height (mm) | 256 mm | 330 mm |
| Voltage (V) | — | 230 V |
| Maximum speed | 500 mm/s | — |
| Category specs | ||
| Footprint X×Y (short side) (mm) | 256 mm | — |
| Build height Z (mm) | 256 mm | — |
| Kinematics | CoreXY | — |
| Max print speed (mm/s) | 500 mm/s | — |
| Filament sensor | Yes | — |
| Multicolor printing | Yes | — |
| Multicolor requires accessory | No | — |
| Max colors | 4 | — |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | Four-color printing runs through the CANVAS system included in the Combo version. | Compatible with PrusaSlicer (open source, with material profiles verified and maintained by Prusa Research), OrcaSlicer, and SuperSlicer, as well as any slicer that exports standard G-code. The firmware is based on Prusa Research's open-source Marlin fork, with input shaping support. Unlike Bambu Lab models, which use a partially proprietary protocol and work best with Bambu Studio, the CORE One L accepts generic G-code via USB, SD card, and PrusaConnect. The user is not locked into a single software ecosystem and can freely modify or update the firmware. |
The differences that matter
- Bed 300 × 300 mm vs 256 × 256 mm, height 330 mm vs 256 mm → a 320 mm tall part prints whole only on the Prusa.
- Four colors with CANVAS included on the Centauri 2 Combo → a multicolor object comes out of a single print.
- Open firmware and generic G-code on the Prusa → no mandatory software, and the tuning stays in your hands.
Which one to choose
Choose Centauri 2 Combo if…
You print multicolor objects, up to four colors, with CANVAS included in the Combo version. The trade-off is volume: a part as wide as the Prusa's bed won't fit here.
Choose XL if…
You need bigger parts and a system you can modify: the XL works with PrusaSlicer, OrcaSlicer or SuperSlicer, accepts generic G-code over USB, SD or PrusaConnect, and its Marlin-based firmware can be updated or modified freely. The trade-off is the outlay, around 1800 euros.
Where to buy
Paid link: the price for you does not change. Methodology
As an Amazon Associate I earn from qualifying purchases.
MakerSpecs is an independent atlas. We don't sell products: the purchase links are the same as on the two product sheets and don't influence the verdict. The sheets have the complete data.