Creality Hi Combo vs Creality K2 Combo
Technical comparison · Fused filament fabrication (FFF/FDM)
The chamber decides: the K2 Combo is enclosed and reaches 16 colors, the Hi Combo is open and handles four. The Hi Combo costs about €275 less (€349 against a price between €550 and €700).
| Parameter | ||
|---|---|---|
| Identity | ||
| Launch year | 2025 | 2024 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | 349 € | ~550–700 € |
| Price updated on | 06/2026 | 06/2026 |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 40.9 × 39.2 × 47.7 cm | 40.4 × 43.6 × 54.5 cm |
| Weight (kg) | 13.31 kg | 18 kg |
| Work area (mm) | 260 × 260 mm | 260 × 260 mm |
| Z-axis height (mm) | 300 mm | 260 mm |
| Power (W) | 1150 W | 1350 W |
| Voltage (V) | 220 V | 240 V |
| Maximum speed | 500 mm/s | 600 mm/s |
| Declared precision | 0.1 mm | 0.1 mm |
| Category specs | ||
| Footprint X×Y (short side) (mm) | 260 mm | 260 mm |
| Build height Z (mm) | 300 mm | 260 mm |
| Kinematics | Cartesian | CoreXY |
| Max nozzle temperature (°C) | 300 °C | 300 °C |
| Max bed temperature (°C) | 100 °C | 100 °C |
| Max print speed (mm/s) | 500 mm/s | 600 mm/s |
| Enclosed chamber | No | Yes |
| Filament sensor | Yes | Yes |
| Auto bed leveling | Mesh | Mesh |
| Standard nozzle diameter (mm) | 0.4 mm | 0.4 mm |
| Multi-extruder | No | No |
| Native Klipper | No | Yes |
| Input shaper | Yes | Yes |
| Multicolor printing | Yes | Yes |
| Multicolor requires accessory | No | No |
| Max colors | 4 | 16 |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | Runs Creality OS, a Klipper-derived firmware, with input shaper and pressure advance pre-configured. The primary slicer is Creality Print (free), also compatible with Orca Slicer. Remote monitoring via Creality Cloud is available but not required for local use. | Powered by CrealityOS, a Klipper-based firmware, it supports remote control via Wi-Fi or LAN and interfaces natively with Creality Print and other compatible slicers for advanced multi-color workflow management. |
The differences that matter
- Enclosed chamber on the K2 Combo only → the Hi Combo prints in the open.
- Max colors: 4 against 16 → projects with more than four colors are out of reach on the Hi Combo.
- Build height 300 mm against 260 mm → parts 40 mm taller fit on the Hi Combo.
Which one to choose
Choose Hi Combo if…
you want multicolor on a modest budget and also print tall parts, without paying nearly double. The trade-off: you print in the open and colors stop at four.
Choose K2 Combo if…
you print in an enclosed chamber and your projects use many colors. The trade-off: about €275 more and less height for tall parts.
Where to buy
Paid link: the price for you does not change. Methodology
Filaments for these printers
The most chosen spools among the materials both printers can print according to their specifications.
- ELEGOO PLA PLA1.75 mm1 kg Check the price on Amazon →
- Bambu Lab PLA PLA1.75 mm1 kg Check the price on Amazon →
- SUNLU PETG (Polyethylene Terephthalate Glycol) PETG (Polyethylene Terephthalate Glycol)1.75 mm1 kg Check the price on Amazon →
- SUNLU PLA PLA1.75 mm1 kg Check the price on Amazon →
- OVERTURE PETG (Polyethylene Terephthalate Glycol) PETG (Polyethylene Terephthalate Glycol)High speed1.75 mm1 kg Check the price on Amazon →
Paid link: the price for you does not change. Methodology
As an Amazon Associate I earn from qualifying purchases.
MakerSpecs is an independent atlas. We don't sell products: the purchase links are the same as on the two product sheets and don't influence the verdict. The sheets have the complete data.