Cebora EVO 350 TS Synergic vs Cebora EVO 450 TS Synergic
Technical comparison · MIG/MAG welding (wire feed)
EVO 350 TS Synergic and EVO 450 TS Synergic are two mig/mag welding (wire feed) in a similar class. Choose EVO 350 TS Synergic if price matters more; choose EVO 450 TS Synergic if max wire diameter matters more. On the category's overall technical index, EVO 450 TS Synergic scores 100/100 against 89/100 for EVO 350 TS Synergic.
| Parameter |
EVO 350 TS Synergic
Cebora
F4 · Semi-professional
|
EVO 450 TS Synergic
Cebora
F5 · Professional
|
|---|---|---|
| Identity | ||
| Use tier | F4 — Semi-professional | F5 — Professional |
| Price | ||
| Price (€) | ~2600–3200 € | ~4500–6500 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 61.5 × 97.5 × 90 cm | 61.5 × 97.5 × 90 cm |
| Weight (kg) | 90 kg | 125 kg |
| Power (W) | 15900 W | 23500 W |
| Voltage (V) | 400 V | 400 V |
| Category specs | ||
| Welding type | MIG/MAG | MIG/MAG |
| Max wire feed speed (m/min) | 24 m/min | — |
| Max welding current (A) | 400 A | 500 A |
| Max wire diameter (mm) | 1.2 mm | 1.6 mm |
| Duty cycle (rated current) (%) | 40 % | — |
| Synergic control | True | True |
| Gasless capable | True | True |
| Power source technology | Transformer | Transformer |
| Aluminium ready | True | True |
| Pulse capable | False | False |
| Input voltage | Dual voltage | Dual voltage |
| Supported spool | Ø300 mm (~15 kg) | Ø300 mm (~15 kg) |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The system does not rely on external or cloud-based software, operating entirely through an integrated digital control board. This interface manages pre-saved synergic curves for various alloys (mild steel, stainless steel, aluminum, CuSi3 brazing) and allows direct panel adjustment of advanced welding parameters such as post-gas, soft start, and burn-back. | The machine does not require any external PC or cloud-based control software, operating with complete autonomy through its integrated digital panel. The internal management system is equipped with a microprocessor board that stores and manages a wide range of pre-set synergic curves, optimized for various materials such as carbon steel, stainless steel, aluminum alloys, and Cu-Si3 brazing. The operator can easily recall the optimal parameters from the display, simplifying the setup for solid or flux-cored wires. Advanced functions directly accessible from the welder's interface include the adjustment of post-gas time, soft start, spot and pause time, electronic inductance, and burn back, offering precise control over the entire thermal cycle without any IT dependencies. |
The differences that matter
- Price: EVO 350 TS Synergic 2900 € vs EVO 450 TS Synergic 5500 € — EVO 350 TS Synergic wins (+90%)
- Max wire diameter: EVO 350 TS Synergic 1.2 mm vs EVO 450 TS Synergic 1.6 mm — EVO 450 TS Synergic wins (+33%)
Which one to choose
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.