Cebora KINGSTAR 520 TS Multiprocess Welder vs Cebora EVO 450 TS Synergic
Technical comparison · MIG/MAG welding (wire feed)
EVO 450 TS Synergic leads on the available specs (starting with price); KINGSTAR 520 TS Multiprocess Welder makes sense only for non-technical reasons (availability, support, ecosystem), or if the missing data matters in your case.
| Parameter |
KINGSTAR 520 TS Multiprocess Welder
Cebora
F5 · Professional
|
EVO 450 TS Synergic
Cebora
F5 · Professional
|
|---|---|---|
| Identity | ||
| Use tier | F5 — Professional | F5 — Professional |
| Price | ||
| Price (€) | ~7500–10000 € | ~4500–6500 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 58.8 × 112 × 138 cm | 61.5 × 97.5 × 90 cm |
| Weight (kg) | 130 kg | 125 kg |
| Power (W) | 25800 W | 23500 W |
| Voltage (V) | 400 V | 400 V |
| Category specs | ||
| Welding type | Multi-process | MIG/MAG |
| Max welding current (A) | 520 A | 500 A |
| Max wire diameter (mm) | 1.6 mm | 1.6 mm |
| Duty cycle (rated current) (%) | 40 % | — |
| Synergic control | True | True |
| Gasless capable | True | True |
| Power source technology | Inverter | Transformer |
| Aluminium ready | True | True |
| Pulse capable | True | False |
| Input voltage | 400 V (three-phase) | Dual voltage |
| Supported spool | Ø300 mm (~15 kg) | Ø300 mm (~15 kg) |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The user interface is centered around a 7-inch color touchscreen display, allowing intuitive and granular control over all welding parameters. The system integrates advanced synergic curves to optimize MIG Root and Short HD processes, with optional Pulse and Double Pulse configurations. Fully prepared for Industry 4.0, the KINGSTAR 520 TS features LAN connectivity for remote monitoring, diagnostics, and production data export. It also supports digital protocols like CANopen for seamless integration into robotic cells, alongside USB ports to facilitate firmware updates and personalized setting backups. | The machine does not require any external PC or cloud-based control software, operating with complete autonomy through its integrated digital panel. The internal management system is equipped with a microprocessor board that stores and manages a wide range of pre-set synergic curves, optimized for various materials such as carbon steel, stainless steel, aluminum alloys, and Cu-Si3 brazing. The operator can easily recall the optimal parameters from the display, simplifying the setup for solid or flux-cored wires. Advanced functions directly accessible from the welder's interface include the adjustment of post-gas time, soft start, spot and pause time, electronic inductance, and burn back, offering precise control over the entire thermal cycle without any IT dependencies. |
The differences that matter
- Price: KINGSTAR 520 TS Multiprocess Welder 8750 € vs EVO 450 TS Synergic 5500 € — EVO 450 TS Synergic wins (+59%)
Which one to choose
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.