Bambu Lab X2D vs Qidi Tech Q2
Technical comparison · Fused filament fabrication (FFF/FDM)
The X2D and the Q2 are two enclosed CoreXY machines on a similar budget, and the choice comes down to one question: the X2D's dual extruder, or the Q2's native Klipper firmware and nozzle up to 370 °C, at €130 less.
| Parameter | ||
|---|---|---|
| Identity | ||
| Launch year | 2026 | 2025 |
| Use tier | F3 — Advanced | F2 — Intermediate |
| Price | ||
| Price (€) | 629 € | 499 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 39.2 × 40.6 × 47.8 cm | 40.2 × 43.8 × 49.4 cm |
| Weight (kg) | 16.25 kg | 18.1 kg |
| Work area (mm) | 256 × 256 mm | 270 × 270 mm |
| Z-axis height (mm) | 260 mm | 256 mm |
| Power (W) | 1600 W | 630 W |
| Maximum speed | 1000 mm/s | 600 mm/s |
| Declared precision | 50 μm | — |
| Category specs | ||
| Footprint X×Y (short side) (mm) | 256 mm | 270 mm |
| Build height Z (mm) | 260 mm | 256 mm |
| Kinematics | CoreXY | CoreXY |
| Max nozzle temperature (°C) | 300 °C | 370 °C |
| Max bed temperature (°C) | 120 °C | 120 °C |
| Max print speed (mm/s) | 1000 mm/s | 600 mm/s |
| Enclosed chamber | Yes | Yes |
| Filament sensor | Yes | Yes |
| Auto bed leveling | Mesh | Mesh |
| Standard nozzle diameter (mm) | 0.4 mm | 0.4 mm |
| Multi-extruder | Yes | No |
| Native Klipper | No | Yes |
| Input shaper | Yes | Yes |
| Multicolor printing | Yes | Yes |
| Multicolor requires accessory | Yes | Yes |
| Max colors | 25 | 16 |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The X2D uses Bambu Studio as its official software, available for Windows, macOS, and Linux. It also accepts standard G-code from third-party slicers such as PrusaSlicer, SuperSlicer, and Cura, though some advanced features — including automatic calibration and dual-nozzle workflow management — are only fully supported within Bambu Studio. | The system is natively supported by QIDI Studio, a slicing software derived from PrusaSlicer and Orca Slicer, providing a modern interface and advanced features. The open architecture still allows the use of third-party slicing solutions. Network connectivity, via Wi-Fi or Ethernet, facilitates direct remote printing and monitoring, aided by the built-in camera. |
The differences that matter
- Extruder: dual on the X2D, single on the Q2 → only the X2D puts two filaments in one part with two nozzles.
- Nozzle: 300 °C on the X2D, 370 °C on the Q2 → filaments that need more than 300 °C call for the Q2.
- Firmware: native Klipper on the Q2, not on the X2D → on the Q2 the machine runs Klipper out of the box.
- Price: €629 against €499 → the Q2 costs €130 less.
Which one to choose
Choose X2D if…
you print parts with two different filaments thanks to the dual extruder, which the Q2 doesn't have. You pay €629 instead of €499 and accept a nozzle that tops out at 300 °C and no native Klipper: automatic calibration and dual-nozzle management are fully supported only in Bambu Studio.
Choose Q2 if…
you work with materials that need a nozzle above 300 °C (manufacturer-declared values) and prefer native Klipper firmware. You use QIDI Studio, derived from PrusaSlicer and Orca Slicer, or third-party slicers, and print over the network via Wi-Fi or Ethernet with the built-in camera. It costs €499, €130 less; you give up the dual extruder.
Where to buy
Paid link: the price for you does not change. Methodology
As an Amazon Associate I earn from qualifying purchases.
Filaments for these printers
The most chosen spools among the materials both printers can print according to their specifications.
- ELEGOO PLA PLA1.75 mm1 kg Check the price on Amazon →
- Bambu Lab PLA PLA1.75 mm1 kg Check the price on Amazon →
- SUNLU PETG (Polyethylene Terephthalate Glycol) PETG (Polyethylene Terephthalate Glycol)1.75 mm1 kg Check the price on Amazon →
- SUNLU PLA PLA1.75 mm1 kg Check the price on Amazon →
- OVERTURE PETG (Polyethylene Terephthalate Glycol) PETG (Polyethylene Terephthalate Glycol)High speed1.75 mm1 kg Check the price on Amazon →
Paid link: the price for you does not change. Methodology
As an Amazon Associate I earn from qualifying purchases.
MakerSpecs is an independent atlas. We don't sell products: the purchase links are the same as on the two product sheets and don't influence the verdict. The sheets have the complete data.