Anycubic Kobra X Combo vs Snapmaker U1
Technical comparison · Fused filament fabrication (FFF/FDM)
Between these two similarly-tiered open-frame FDM printers, the choice comes down to multicolor: the U1 has four built-in toolheads that switch material without accessories, the Kobra X Combo doesn't. The price runs the opposite way.
| Parameter | ||
|---|---|---|
| Identity | ||
| Launch year | 2026 | 2026 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | 589 € | 849 € |
| Price updated on | 06/2026 | — |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 45.54 × 44.53 × 46.13 cm | 58.4 × 49.9 × 73 cm |
| Weight (kg) | 13.2 kg | 18.2 kg |
| Work area (mm) | 260 × 260 mm | 270 × 270 mm |
| Z-axis height (mm) | 260 mm | 270 mm |
| Power (W) | — | 1150 W |
| Maximum speed | 600 mm/s | 500 mm/s |
| Declared precision | — | 0.04 mm |
| Category specs | ||
| Footprint X×Y (short side) (mm) | 260 mm | 270 mm |
| Build height Z (mm) | 260 mm | 270 mm |
| Kinematics | Cartesian | CoreXY |
| Max nozzle temperature (°C) | 300 °C | 300 °C |
| Max bed temperature (°C) | 100 °C | 100 °C |
| Max print speed (mm/s) | 600 mm/s | 500 mm/s |
| Enclosed chamber | No | No |
| Filament sensor | Yes | Yes |
| Auto bed leveling | Mesh | Mesh |
| Standard nozzle diameter (mm) | 0.4 mm | 0.4 mm |
| Multi-extruder | No | Yes |
| Native Klipper | Yes | Yes |
| Input shaper | Yes | Yes |
| Multicolor printing | Yes | Yes |
| Multicolor requires accessory | No | No |
| Max colors | 4 | 4 |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | Powered by Kobra OS (a Klipper fork), it features Wi-Fi connectivity, vibration compensation, dynamic flow calibration, and a camera with built-in AI detection. | The primary software is Snapmaker Orca, an optimized version of the popular OrcaSlicer, which provides native management of the four toolheads and factory-calibrated material profiles. The printer can also be seamlessly managed via the Snapmaker mobile app for remote monitoring, taking advantage of the built-in 1080p camera. The internal firmware is built on Klipper, Moonraker, and Fluidd, which Snapmaker has made open-source, allowing experienced users to customize the machine and integrate it into complex workflows. |
The differences that matter
- Price: €589 on the Kobra X Combo against €849 on the U1.
- Built-in multi-extruder: only on the U1.
- Declared max speed: 600 mm/s on the Kobra X Combo against 500 mm/s on the U1.
- Work area: 260×260 mm on the Kobra X Combo against 270×270 mm on the U1, a minimal difference.
Which one to choose
Choose Kobra X Combo if…
Anyone mostly printing single-color parts and wanting to spend less picks the Kobra X Combo at €589, with a declared print speed up to 600 mm/s. The trade-off is no built-in multi-extruder.
Choose U1 if…
Anyone printing multi-material or multicolor parts often uses the U1's four built-in toolheads, at €849. The trade-off is a lower declared print speed (500 mm/s against 600 mm/s).
Where to buy
Paid link: the price for you does not change. Methodology
Filaments for these printers
The most chosen spools among the materials both printers can print according to their specifications.
- ELEGOO PLA PLA1.75 mm1 kg Check the price on Amazon →
- Bambu Lab PLA PLA1.75 mm1 kg Check the price on Amazon →
- SUNLU PETG (Polyethylene Terephthalate Glycol) PETG (Polyethylene Terephthalate Glycol)1.75 mm1 kg Check the price on Amazon →
- SUNLU PLA PLA1.75 mm1 kg Check the price on Amazon →
- OVERTURE PETG (Polyethylene Terephthalate Glycol) PETG (Polyethylene Terephthalate Glycol)High speed1.75 mm1 kg Check the price on Amazon →
Paid link: the price for you does not change. Methodology
As an Amazon Associate I earn from qualifying purchases.
MakerSpecs is an independent atlas. We don't sell products: the purchase links are the same as on the two product sheets and don't influence the verdict. The sheets have the complete data.