Anycubic Kobra X Combo vs Creality Hi Combo
Technical comparison · Fused filament fabrication (FFF/FDM)
The Kobra X Combo and the Hi Combo print in the same 260×260 mm area but start from different technical choices: the Kobra X Combo bets on native Klipper and a higher declared speed, the Hi Combo on a lower price and a taller Z height.
| Parameter | ||
|---|---|---|
| Identity | ||
| Launch year | 2026 | 2025 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | 589 € | 349 € |
| Price updated on | 06/2026 | 06/2026 |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 45.54 × 44.53 × 46.13 cm | 40.9 × 39.2 × 47.7 cm |
| Weight (kg) | 13.2 kg | 13.31 kg |
| Work area (mm) | 260 × 260 mm | 260 × 260 mm |
| Z-axis height (mm) | 260 mm | 300 mm |
| Power (W) | — | 1150 W |
| Voltage (V) | — | 220 V |
| Maximum speed | 600 mm/s | 500 mm/s |
| Declared precision | — | 0.1 mm |
| Category specs | ||
| Footprint X×Y (short side) (mm) | 260 mm | 260 mm |
| Build height Z (mm) | 260 mm | 300 mm |
| Kinematics | Cartesian | Cartesian |
| Max nozzle temperature (°C) | 300 °C | 300 °C |
| Max bed temperature (°C) | 100 °C | 100 °C |
| Max print speed (mm/s) | 600 mm/s | 500 mm/s |
| Enclosed chamber | No | No |
| Filament sensor | Yes | Yes |
| Auto bed leveling | Mesh | Mesh |
| Standard nozzle diameter (mm) | 0.4 mm | 0.4 mm |
| Multi-extruder | No | No |
| Native Klipper | Yes | No |
| Input shaper | Yes | Yes |
| Multicolor printing | Yes | Yes |
| Multicolor requires accessory | No | No |
| Max colors | 4 | 4 |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | Powered by Kobra OS (a Klipper fork), it features Wi-Fi connectivity, vibration compensation, dynamic flow calibration, and a camera with built-in AI detection. | Runs Creality OS, a Klipper-derived firmware, with input shaper and pressure advance pre-configured. The primary slicer is Creality Print (free), also compatible with Orca Slicer. Remote monitoring via Creality Cloud is available but not required for local use. |
The differences that matter
- Price: the Hi Combo costs €240 less than the Kobra X Combo.
- Native Klipper: only on the Kobra X Combo → direct macros and calibration with no proprietary fork.
- Z height: 300 mm on the Hi Combo versus 260 mm on the Kobra X Combo → more room for tall vertical parts.
- Declared speed: 600 mm/s on the Kobra X Combo versus 500 mm/s on the Hi Combo.
Which one to choose
Choose Kobra X Combo if…
Pick it if you want native Klipper to tune macros and calibration without going through a proprietary fork: the manufacturer's declared speed reaches 600 mm/s versus 500. It costs €240 more and the Z height tops out at 260 mm versus 300.
Choose Hi Combo if…
Pick it if budget matters more: it costs €240 less than the Kobra X Combo, and the 300 mm Z height leaves more room for tall vertical parts. Its Klipper-derived but non-native firmware and the declared 500 mm/s speed are the trade-off.
Where to buy
Paid link: the price for you does not change. Methodology
Filaments for these printers
The most chosen spools among the materials both printers can print according to their specifications.
- ELEGOO PLA PLA1.75 mm1 kg Check the price on Amazon →
- Bambu Lab PLA PLA1.75 mm1 kg Check the price on Amazon →
- SUNLU PETG (Polyethylene Terephthalate Glycol) PETG (Polyethylene Terephthalate Glycol)1.75 mm1 kg Check the price on Amazon →
- SUNLU PLA PLA1.75 mm1 kg Check the price on Amazon →
- OVERTURE PETG (Polyethylene Terephthalate Glycol) PETG (Polyethylene Terephthalate Glycol)High speed1.75 mm1 kg Check the price on Amazon →
Paid link: the price for you does not change. Methodology
As an Amazon Associate I earn from qualifying purchases.
MakerSpecs is an independent atlas. We don't sell products: the purchase links are the same as on the two product sheets and don't influence the verdict. The sheets have the complete data.