Anycubic Photon Mono M7 vs Elegoo Saturn 4
Technical comparison · Resin 3D printing
Two resin printers with a monochrome LCD, launched the same year, with nearly identical build areas (223 × 126 mm against 218.88 × 122.88 mm). The choice is between the Photon Mono M7's higher declared speed and Wi-Fi, and the roughly €190 saved with the Saturn 4.
| Parameter | ||
|---|---|---|
| Identity | ||
| Launch year | 2024 | 2024 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | 499 € | ~299–319 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 31.2 × 31.5 × 52 cm | 32.74 × 32.92 × 54.8 cm |
| Weight (kg) | 11.5 kg | 13.5 kg |
| Work area (mm) | 223 × 126 mm | 218.88 × 122.88 mm |
| Z-axis height (mm) | 230 mm | 220 mm |
| Power (W) | 120 W | 144 W |
| Voltage (V) | 100 V | 240 V |
| Maximum speed | 130 mm/s | — |
| Declared precision | 16.8 μm | 0.02 mm |
| Category specs | ||
| Build area XY (short side) (mm) | 126 mm | 122.88 mm |
| XY resolution (µm) | 16.8 µm | 19 µm |
| Light source | Mono LCD | Mono LCD |
| Print speed (mm/h) | 130 mm/h | 70 mm/h |
| Tilt / peel system | Film ACF | Standard FEP |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | File management and print preparation rely primarily on Anycubic Photon Workshop, which integrates optimized profiles to take advantage of the machine's reduced exposure times. The ecosystem supports network connectivity via Wi-Fi and allows remote monitoring and control through the Anycubic Cloud mobile application. While offering advanced cloud features for print queue management and firmware updates, the printer maintains full local offline operational capability. Compatibility with major third-party slicers such as ChiTuBox and Lychee Slicer is guaranteed upon manual configuration of the parameters. | The machine is supported by major slicing software on the market, including optimized profiles for CHITUBOX and VoxelDance Tango, ensuring broad operational flexibility. The system relies entirely on USB connection for file transfer and offline printing, eliminating any dependency on cloud services. The onboard interface is managed via a practical 3.5-inch resistive touchscreen that allows users to start prints, monitor basic parameters, and utilize automated diagnostic features, such as the initial self-check of mechanics and sensors. |
The differences that matter
- Price, €499 vs about €309 → about €190 stay with whoever gives up phone control.
- Print speed, 130 mm/h vs 70 mm/h (manufacturer-declared values) → on tall parts the Photon Mono M7 declares shorter print times.
- Connectivity, Wi-Fi and app vs USB only → the Photon Mono M7 is monitored from a phone; the Saturn 4 is started from its touchscreen with files on a USB stick.
Which one to choose
Choose Photon Mono M7 if…
For anyone printing miniatures or tall parts often and wanting to follow the job from a phone with the Anycubic app: it declares 130 mm/h against 70 mm/h, 16.8 µm XY resolution against 19 µm, and an ACF film instead of standard FEP. The trade-off is the price, about €190 more, and Photon Workshop as the reference software, with ChiTuBox and Lychee needing manual setup.
Choose Saturn 4 if…
For occasional printing and about €190 kept in the pocket: the area is nearly the same and the Saturn 4 works with ChiTuBox and VoxelDance Tango. You accept a declared 70 mm/h and file transfer by USB only, with no remote control: prints start from the resistive touchscreen, after an initial self-check of mechanics and sensors.
Where to buy
Paid link: the price for you does not change. Methodology
As an Amazon Associate I earn from qualifying purchases.
MakerSpecs is an independent atlas. We don't sell products: the purchase links are the same as on the two product sheets and don't influence the verdict. The sheets have the complete data.