ABS-like resin
Frequently asked questions
Can ABS-like resin be 3D printed?
Yes, using Resin.
Is ABS-like resin food safe?
No, ABS-like resin is not considered food safe.
Where to buy it
Bottles of ABS-like resin sold online, most chosen first.
- Anycubic ABS-Like Resin 3.0 ABS-like Check the price at Anycubic →
- Anycubic ABS-Like Resin 2.0 ABS-like Check the price at Anycubic →
- Anycubic ABS-Like Resin Pro 2 ABS-like Check the price at Anycubic →
- Anycubic ABS-Like Resin+ ABS-like Check the price at Anycubic →
- Anycubic ABS-Like Resin Pro ABS-like Check the price at Anycubic →
No spools match these filters.
Paid link: the price for you does not change. Methodology
Physical properties
| Density | 1060.0–1090.0 kg/m³ |
|---|---|
| Tensile strength | 38.0 MPa |
3D printing
Post-processing
Over time: From the manufacturer's data sheet: once cured it resists weak acids and bases and some solvents such as alcohol, but not strong solvents such as acetone. The bottle keeps for 18 months in its original container, between 20 and 50 °C and away from light.
Common defects
- Failed prints when the resin is below 20 °C: the manufacturer recommends printing between 20 and 50 °C
- Sediment at the bottom of the vat: stir with a plastic spatula or pour back into the bottle and shake
- Resin curing in the vat under sunlight: print in a dark place or with the cover closed
- Uncured prints left too long in the cleaning liquid lose performance
Safety
Recommended PPE: gloves_nitrile, eye_protection
Manufacturer's safety data sheet (CLP): the liquid resin causes skin irritation, may cause an allergic skin reaction, causes serious eye damage and is harmful to aquatic life with long lasting effects (H315, H317, H318, H412). Nitrile gloves and safety glasses, in a ventilated room. Wash in isopropyl alcohol or ethanol for at least 3 minutes, then cure under UV for 3 minutes. Once cured it is disposed of as plastic waste; liquid resin and containers go to an approved waste disposal facility.
Related materials
Sources
- Anycubic ABS-Like Resin 3.0 — Technical Data Sheet (densità 1.06–1.09 g/cm³ ASTM D792; trazione 38–45 MPa ASTM D638, in scheda il limite inferiore): https://cdn.shopify.com/s/files/1/0245/5519/2380/files/ANYCUBIC-TDS-ABS-Like_Resin_3.0_815df629-d242-4968-9f14-0defcf102280.pdf
- Anycubic ABS-Like Resin 3.0 — Safety Data Sheet CLP (H315, H317, H318, H412; punto di infiammabilità 150 °C): https://cdn.shopify.com/s/files/1/0245/5519/2380/files/EN_SDS_ABS-Like_Resin3.0__SDS_SGS_GHS_ANNEXIICLP_20250523_SGS-SHENZHEN-40_Shenzhen_Anycubic_Technology_Co._Ltd_eeee231a-2435-404d-896f-b2ade8b522a2.pdf
- Anycubic ABS-Like Resin Pro 2 (Shore D 82–84, trazione 35–45 MPa, allungamento 35–40 %): https://cdn.shopify.com/s/files/1/0698/1235/5357/files/ANYCUBIC-TDS-ABS-Like_Resin_Pro_2.pdf
Information on compatibility, processing parameters and safety is purely indicative. MakerSpecs accepts no liability for damage to persons or property arising from the use of this data. Always check the safety rules and the manufacturer's official manuals before carrying out any processing.