Cebora EVO 450 TS Synergic vs Telwin TELMIG 250/2
Technical comparison · MIG/MAG welding (wire feed)
EVO 450 TS Synergic and TELMIG 250/2 are not direct competitors: different use classes (F5 vs F2), very different prices (~5×). TELMIG 250/2 costs less (~€1100) and is the entry-level choice; EVO 450 TS Synergic offers more capability at a higher price (~€5500). Judge them by budget, not head-to-head.
| Parameter |
EVO 450 TS Synergic
Cebora
F5 · Professional
|
TELMIG 250/2
Telwin
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Use tier | F5 — Professional | F2 — Intermediate |
| Price | ||
| Price (€) | ~4500–6500 € | ~900–1300 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 61.5 × 97.5 × 90 cm | 45 × 80 × 65.5 cm |
| Weight (kg) | 125 kg | 50 kg |
| Power (W) | 23500 W | 7000 W |
| Voltage (V) | 400 V | 400 V |
| Maximum speed | — | 20000 mm/min |
| Category specs | ||
| Welding type | MIG/MAG | MIG/MAG |
| Max wire feed speed (m/min) | — | 20 m/min |
| Max welding current (A) | 500 A | 260 A |
| Max wire diameter (mm) | 1.6 mm | 1 mm |
| Duty cycle (rated current) (%) | — | 20 % |
| Synergic control | True | False |
| Gasless capable | True | False |
| Power source technology | Transformer | Transformer |
| Aluminium ready | True | True |
| Pulse capable | False | False |
| Input voltage | Dual voltage | Dual voltage |
| Supported spool | Ø300 mm (~15 kg) | Ø300 mm (~15 kg) |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The machine does not require any external PC or cloud-based control software, operating with complete autonomy through its integrated digital panel. The internal management system is equipped with a microprocessor board that stores and manages a wide range of pre-set synergic curves, optimized for various materials such as carbon steel, stainless steel, aluminum alloys, and Cu-Si3 brazing. The operator can easily recall the optimal parameters from the display, simplifying the setup for solid or flux-cored wires. Advanced functions directly accessible from the welder's interface include the adjustment of post-gas time, soft start, spot and pause time, electronic inductance, and burn back, offering precise control over the entire thermal cycle without any IT dependencies. | As a traditional electromechanical welding machine based on a transformer, the TELMIG 250/2 does not have any onboard software or operating system. There is no digital interface, nor the ability to connect to the cloud or save custom programs. All adjustments are made physically via the step switches on the front panel, which allow the operator to set the voltage in six different positions and to adjust the wire feed speed using an analog potentiometer. |
The differences that matter
- Price: EVO 450 TS Synergic 5500 € vs TELMIG 250/2 1100 € — TELMIG 250/2 wins (+400%)
- Max wire diameter: EVO 450 TS Synergic 1.6 mm vs TELMIG 250/2 1 mm — EVO 450 TS Synergic wins (+60%)
- Synergic control: EVO 450 TS Synergic yes, TELMIG 250/2 no
- Gasless capable: EVO 450 TS Synergic yes, TELMIG 250/2 no
Which one to choose
Choose EVO 450 TS Synergic if…
you value max wire diameter, synergic control and gasless capable.
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.