Cebora EVO 450 TS Synergic vs Telwin TELMIG 281/2 MIG-MAG Welder
Technical comparison · MIG/MAG welding (wire feed)
EVO 450 TS Synergic and TELMIG 281/2 MIG-MAG Welder are not direct competitors: different use classes (F5 vs F3), very different prices (~3.7×). TELMIG 281/2 MIG-MAG Welder costs less (~€1500) and is the entry-level choice; EVO 450 TS Synergic offers more capability at a higher price (~€5500). Judge them by budget, not head-to-head.
| Parameter |
EVO 450 TS Synergic
Cebora
F5 · Professional
|
TELMIG 281/2 MIG-MAG Welder
Telwin
F3 · Advanced
|
|---|---|---|
| Identity | ||
| Use tier | F5 — Professional | F3 — Advanced |
| Price | ||
| Price (€) | ~4500–6500 € | ~1400–1600 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 61.5 × 97.5 × 90 cm | 45 × 80 × 65.5 cm |
| Weight (kg) | 125 kg | 55 kg |
| Power (W) | 23500 W | 9500 W |
| Voltage (V) | 400 V | 230 V |
| Category specs | ||
| Welding type | MIG/MAG | MIG/MAG |
| Max welding current (A) | 500 A | 270 A |
| Max wire diameter (mm) | 1.6 mm | 1.2 mm |
| Duty cycle (rated current) (%) | — | 20 % |
| Synergic control | True | False |
| Gasless capable | True | False |
| Power source technology | Transformer | Transformer |
| Aluminium ready | True | True |
| Pulse capable | False | False |
| Input voltage | Dual voltage | 230 V (single-phase) |
| Supported spool | Ø300 mm (~15 kg) | Ø300 mm (~15 kg) |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The machine does not require any external PC or cloud-based control software, operating with complete autonomy through its integrated digital panel. The internal management system is equipped with a microprocessor board that stores and manages a wide range of pre-set synergic curves, optimized for various materials such as carbon steel, stainless steel, aluminum alloys, and Cu-Si3 brazing. The operator can easily recall the optimal parameters from the display, simplifying the setup for solid or flux-cored wires. Advanced functions directly accessible from the welder's interface include the adjustment of post-gas time, soft start, spot and pause time, electronic inductance, and burn back, offering precise control over the entire thermal cycle without any IT dependencies. | — |
The differences that matter
- Price: EVO 450 TS Synergic 5500 € vs TELMIG 281/2 MIG-MAG Welder 1500 € — TELMIG 281/2 MIG-MAG Welder wins (+267%)
- Synergic control: EVO 450 TS Synergic yes, TELMIG 281/2 MIG-MAG Welder no
- Gasless capable: EVO 450 TS Synergic yes, TELMIG 281/2 MIG-MAG Welder no
- Max wire diameter: EVO 450 TS Synergic 1.6 mm vs TELMIG 281/2 MIG-MAG Welder 1.2 mm — EVO 450 TS Synergic wins (+33%)
Which one to choose
Choose EVO 450 TS Synergic if…
you value synergic control, gasless capable and max wire diameter.
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.