Cebora EVO 450 TS Synergic vs Lincoln Electric Easy-MIG 180
Technical comparison · MIG/MAG welding (wire feed)
EVO 450 TS Synergic and Easy-MIG 180 are not direct competitors: different use classes (F5 vs F2), very different prices (~7.9×). Easy-MIG 180 costs less (~€700) and is the entry-level choice; EVO 450 TS Synergic offers more capability at a higher price (~€5500). Judge them by budget, not head-to-head.
| Parameter |
EVO 450 TS Synergic
Cebora
F5 · Professional
|
Easy-MIG 180
Lincoln Electric
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Use tier | F5 — Professional | F2 — Intermediate |
| Price | ||
| Price (€) | ~4500–6500 € | ~600–800 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 61.5 × 97.5 × 90 cm | 25.8 × 46.2 × 35.6 cm |
| Weight (kg) | 125 kg | 25.4 kg |
| Power (W) | 23500 W | — |
| Voltage (V) | 400 V | 230 V |
| Maximum speed | — | 12700 mm/min |
| Category specs | ||
| Welding type | MIG/MAG | MIG/MAG |
| Max wire feed speed (m/min) | — | 12.7 m/min |
| Max welding current (A) | 500 A | 180 A |
| Max wire diameter (mm) | 1.6 mm | 1.14 mm |
| Duty cycle (rated current) (%) | — | 30 % |
| Synergic control | True | False |
| Gasless capable | True | True |
| Power source technology | Transformer | Transformer |
| Aluminium ready | True | True |
| Pulse capable | False | False |
| Input voltage | Dual voltage | 230 V (single-phase) |
| Supported spool | Ø300 mm (~15 kg) | Ø200 mm (~5 kg) |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The machine does not require any external PC or cloud-based control software, operating with complete autonomy through its integrated digital panel. The internal management system is equipped with a microprocessor board that stores and manages a wide range of pre-set synergic curves, optimized for various materials such as carbon steel, stainless steel, aluminum alloys, and Cu-Si3 brazing. The operator can easily recall the optimal parameters from the display, simplifying the setup for solid or flux-cored wires. Advanced functions directly accessible from the welder's interface include the adjustment of post-gas time, soft start, spot and pause time, electronic inductance, and burn back, offering precise control over the entire thermal cycle without any IT dependencies. | As a manual transformer-based MIG/MAG welder, it lacks digital displays, software interfaces, or synergic controls. Parameter adjustment is done via two simple analog selectors on the front panel: one for voltage (stepped adjustment) and one for wire feed speed. No application or cloud connection is required for operation. |
The differences that matter
- Price: EVO 450 TS Synergic 5500 € vs Easy-MIG 180 700 € — Easy-MIG 180 wins (+686%)
- Synergic control: EVO 450 TS Synergic yes, Easy-MIG 180 no
- Max wire diameter: EVO 450 TS Synergic 1.6 mm vs Easy-MIG 180 1.14 mm — EVO 450 TS Synergic wins (+40%)
Which one to choose
Choose EVO 450 TS Synergic if…
you value synergic control and max wire diameter.
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.