Cebora EVO 450 TS Synergic vs Lincoln Electric POWER MIG 140C
Technical comparison · MIG/MAG welding (wire feed)
EVO 450 TS Synergic and POWER MIG 140C are not direct competitors: different use classes (F5 vs F2), very different prices (~6.5×). POWER MIG 140C costs less (~€850) and is the entry-level choice; EVO 450 TS Synergic offers more capability at a higher price (~€5500). Judge them by budget, not head-to-head.
| Parameter |
EVO 450 TS Synergic
Cebora
F5 · Professional
|
POWER MIG 140C
Lincoln Electric
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Use tier | F5 — Professional | F2 — Intermediate |
| Price | ||
| Price (€) | ~4500–6500 € | ~750–950 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 61.5 × 97.5 × 90 cm | 25.8 × 47.2 × 35.6 cm |
| Weight (kg) | 125 kg | 26.3 kg |
| Power (W) | 23500 W | — |
| Voltage (V) | 400 V | 120 V |
| Maximum speed | — | 12700 mm/min |
| Category specs | ||
| Welding type | MIG/MAG | MIG/MAG |
| Max wire feed speed (m/min) | — | 12.7 m/min |
| Max welding current (A) | 500 A | 140 A |
| Max wire diameter (mm) | 1.6 mm | 0.9 mm |
| Duty cycle (rated current) (%) | — | 20 % |
| Synergic control | True | False |
| Gasless capable | True | True |
| Power source technology | Transformer | Transformer |
| Aluminium ready | True | True |
| Pulse capable | False | False |
| Input voltage | Dual voltage | — |
| Supported spool | Ø300 mm (~15 kg) | Ø200 mm (~5 kg) |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The machine does not require any external PC or cloud-based control software, operating with complete autonomy through its integrated digital panel. The internal management system is equipped with a microprocessor board that stores and manages a wide range of pre-set synergic curves, optimized for various materials such as carbon steel, stainless steel, aluminum alloys, and Cu-Si3 brazing. The operator can easily recall the optimal parameters from the display, simplifying the setup for solid or flux-cored wires. Advanced functions directly accessible from the welder's interface include the adjustment of post-gas time, soft start, spot and pause time, electronic inductance, and burn back, offering precise control over the entire thermal cycle without any IT dependencies. | As a traditional analog welding power source, the POWER MIG 140C does not feature digital interfaces, cloud connectivity, or management software. All settings, including wire feed speed and arc voltage, are adjusted manually using the dials on the front control panel. Setup relies entirely on the operator's experience or the parameter chart conveniently printed on the inside of the wire spool door. There are no menus, LCD screens, or synergic control functions that would require firmware updates. This purely electromechanical architecture ensures significant longevity and simplified maintenance over time, without the risk of software obsolescence typical of modern digitized machines. |
The differences that matter
- Price: EVO 450 TS Synergic 5500 € vs POWER MIG 140C 850 € — POWER MIG 140C wins (+547%)
- Max wire diameter: EVO 450 TS Synergic 1.6 mm vs POWER MIG 140C 0.9 mm — EVO 450 TS Synergic wins (+78%)
- Synergic control: EVO 450 TS Synergic yes, POWER MIG 140C no
Which one to choose
Choose EVO 450 TS Synergic if…
you value max wire diameter and synergic control.
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.