Cebora EVO 450 TS Synergic vs Lincoln Electric POWER MIG 350MP
Technical comparison · MIG/MAG welding (wire feed)
EVO 450 TS Synergic leads on the available specs (starting with price); POWER MIG 350MP makes sense only for non-technical reasons (availability, support, ecosystem), or if the missing data matters in your case. On the category's overall technical index, EVO 450 TS Synergic scores 97/100 against 78/100 for POWER MIG 350MP.
| Parameter |
EVO 450 TS Synergic
Cebora
F5 · Professional
|
POWER MIG 350MP
Lincoln Electric
F4 · Semi-professional
|
|---|---|---|
| Identity | ||
| Use tier | F5 — Professional | F4 — Semi-professional |
| Price | ||
| Price (€) | ~4500–6500 € | ~6000–7500 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 61.5 × 97.5 × 90 cm | 48 × 98.5 × 80.8 cm |
| Weight (kg) | 125 kg | 116 kg |
| Power (W) | 23500 W | — |
| Voltage (V) | 400 V | — |
| Maximum speed | — | 17700 mm/min |
| Category specs | ||
| Welding type | MIG/MAG | Multi-process |
| Max wire feed speed (m/min) | — | 17.7 m/min |
| Max welding current (A) | 500 A | 350 A |
| Max wire diameter (mm) | 1.6 mm | 1.2 mm |
| Duty cycle (rated current) (%) | — | 60 % |
| Synergic control | True | True |
| Gasless capable | True | True |
| Power source technology | Transformer | — |
| Aluminium ready | True | True |
| Pulse capable | False | True |
| Input voltage | Dual voltage | — |
| Supported spool | Ø300 mm (~15 kg) | — |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The machine does not require any external PC or cloud-based control software, operating with complete autonomy through its integrated digital panel. The internal management system is equipped with a microprocessor board that stores and manages a wide range of pre-set synergic curves, optimized for various materials such as carbon steel, stainless steel, aluminum alloys, and Cu-Si3 brazing. The operator can easily recall the optimal parameters from the display, simplifying the setup for solid or flux-cored wires. Advanced functions directly accessible from the welder's interface include the adjustment of post-gas time, soft start, spot and pause time, electronic inductance, and burn back, offering precise control over the entire thermal cycle without any IT dependencies. | It integrates a digital control panel with MSP3 technology and synergic features that allow setting welding parameters through a single control. It does not require external software for normal use, but internally manages complex welding profiles to optimize penetration and arc stability on various materials. |
The differences that matter
- Price: EVO 450 TS Synergic 5500 € vs POWER MIG 350MP 6750 € — EVO 450 TS Synergic wins (+23%)
- Max wire diameter: EVO 450 TS Synergic 1.6 mm vs POWER MIG 350MP 1.2 mm — EVO 450 TS Synergic wins (+33%)
Which one to choose
Choose EVO 450 TS Synergic if…
you value price and max wire diameter.
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.