S30 Ultra 11W Laser Engraver vs S30 Ultra 33W
Technischer Vergleich · Diodenlaser (405–460 nm)
Tabella comparativa tra Sculpfun S30 Ultra 11W Laser Engraver e Sculpfun S30 Ultra 33W basata sui dati tecnici ufficiali per la lavorazione Diodenlaser (405–460 nm).
| Parameter |
S30 Ultra 11W Laser Engraver
Sculpfun
F2 · Fortgeschritten
|
S30 Ultra 33W
Sculpfun
F2 · Fortgeschritten
|
|---|---|---|
| Identität | ||
| Erscheinungsjahr | 2023 | 2023 |
| Einsatzklasse | F2 — Fortgeschritten | F2 — Fortgeschritten |
| Preis | ||
| Preis (€) | 699 € | 1299.99 € |
| Allgemeine Spezifikationen | ||
| Abmessungen (B×T×H) (cm) | 80 × 84 × 22 cm | 80 × 84 × 22 cm |
| Arbeitsbereich (mm) | 600 × 600 mm | 590 × 595 mm |
| Leistung (W) | 84 W | 156 W |
| Spannung (V) | 24 V | — |
| Angegebene Präzision | 0.005 mm | 0.005 mm |
| Kategoriespezifikationen | ||
| Bereich kurze Seite (mm) | 600 mm | 590 mm |
| Nominale Laserleistung (W) | 11 W | 33 W |
| Laserquellentechnologie | diode | diode |
| Schnitttiefe pro Material | — | 20 mm (balsa wood), 15 mm (plywood), 15 mm (acrylic), 0.1 mm (steel) |
| Laserwellenlänge (nm) | 455 nm | 455 nm |
| Erreichbare Mindestauflösung (µm) | — | 5 µm |
| Automatisches Autofokus-System | False | False |
| Rotationsmodul inklusive | False | False |
| Struktureller Durchlaufschlitz | False | False |
| Steuerungssoftware-Schnittstelle | ['lightburn', 'other'] | ['lightburn', 'other'] |
| Ökosystem | ||
| Cloud-Abhängigkeit | Nein | Nein |
| Software-Hinweise | Vollständig kompatibel mit branchenüblicher Software wie LightBurn und LaserGRBL. Das 32-Bit-Motherboard unterstützt Bluetooth-Konnektivität für die drahtlose Steuerung. | Kompatibel mit LightBurn und LaserGRBL über USB- oder Bluetooth-Verbindung. Erfordert keine Verwendung proprietärer Software. |
MakerSpecs è un atlante indipendente. Non vendiamo prodotti: questo confronto rimanda alle due schede, dove trovi i dati completi e i link ufficiali.