Sculpfun S30 5W Laser Engraver vs Sculpfun S9 Laser Engraver
Confronto tecnico · Laser a diodo (405–460 nm)
S9 Laser Engraver domina sulle specifiche disponibili (a partire da prezzo); S30 5W Laser Engraver ha senso solo per motivi non tecnici (disponibilità, assistenza, ecosistema) o se i dati mancanti pesano nel tuo caso.
| Parametro |
S30 5W Laser Engraver
Sculpfun
F1 · Entry
|
S9 Laser Engraver
Sculpfun
F2 · Intermedio
|
|---|---|---|
| Riconoscimenti | — | |
| Identità | ||
| Anno di lancio | 2022 | 2021 |
| Fascia d'uso | F1 — Entry | F2 — Intermedio |
| Prezzo | ||
| Prezzo (€) | 299 € | 259 € |
| Specifiche universali | ||
| Dimensioni (L×P×A) (cm) | 55.5 × 59.5 × 21 cm | 57 × 60 × 27 cm |
| Peso (kg) | — | 3 kg |
| Area di lavoro (mm) | 410 × 400 mm | 410 × 415 mm |
| Potenza (W) | 60 W | 30 W |
| Tensione (V) | 12 V | — |
| Velocità massima | 6000 mm/min | — |
| Precisione dichiarata | 0.005 mm | 0.01 mm |
| Specifiche di categoria | ||
| Area di lavoro (lato corto) (mm) | 400 mm | 410 mm |
| Potenza nominale (W) | 5 W | 5.5 W |
| Tecnologia sorgente | Diodo | Diodo |
| Velocità massima di spostamento (mm/s) | 100 mm/s | — |
| Velocità massima di lavorazione (mm/s) | 100 mm/s | — |
| Profondità di taglio max per materiale | 5 mm (balsa wood), 3 mm (plywood) | Wood: 15mm, Acrylic: 10mm |
| Lunghezza d'onda (nm) | 455 nm | 450 nm |
| Risoluzione minima (µm) | 60 µm | 10 µm |
| Autofocus | False | False |
| Rotary incluso/compatibile | False | False |
| Passthrough | False | — |
| Software supportato | LightBurn, Altro | LightBurn, Altro |
| Ecosistema | ||
| Dipendenza dal cloud | No | No |
| Note software | Pienamente compatibile con LightBurn e LaserGRBL tramite connessione USB. La scheda madre a 32 bit gestisce automaticamente l'attivazione dell'Air Assist. | Pienamente compatibile con LightBurn e LaserGRBL (solo Windows), operando tramite firmware GRBL standard senza restrizioni proprietarie. |
Riconoscimenti MakerSpecs
S30 5W Laser Engraver
Maggiore area di lavoro Entry
La maggiore area di lavoro tra le macchine Laser a diodo (405–460 nm) entry-level: 1640 cm².
Come assegniamo i riconoscimenti →S9 Laser Engraver
Nessun riconoscimento in questa fascia.
Le differenze che contano
- Prezzo: S30 5W Laser Engraver 299 € vs S9 Laser Engraver 259 € — vince S9 Laser Engraver (+15%)
Quale scegliere
MakerSpecs è un atlante indipendente. Non vendiamo prodotti: questo confronto rimanda alle due schede, dove trovi i dati completi e i link ufficiali.