Sculpfun S30 5W Laser Engraver vs Sculpfun S30 Ultra 11W Laser Engraver
Confronto tecnico · Laser a diodo (405–460 nm)
S30 5W Laser Engraver e S30 Ultra 11W Laser Engraver sono due laser a diodo (405–460 nm) di fascia simile. Scegli S30 5W Laser Engraver se conta di più prezzo; scegli S30 Ultra 11W Laser Engraver se conta di più area di lavoro.
| Parametro |
S30 5W Laser Engraver
Sculpfun
F1 · Entry
|
S30 Ultra 11W Laser Engraver
Sculpfun
F2 · Intermedio
|
|---|---|---|
| Riconoscimenti | — | |
| Identità | ||
| Anno di lancio | 2022 | 2023 |
| Fascia d'uso | F1 — Entry | F2 — Intermedio |
| Prezzo | ||
| Prezzo (€) | 299 € | 699 € |
| Specifiche universali | ||
| Dimensioni (L×P×A) (cm) | 55.5 × 59.5 × 21 cm | 80 × 84 × 22 cm |
| Area di lavoro (mm) | 410 × 400 mm | 600 × 600 mm |
| Potenza (W) | 60 W | 84 W |
| Tensione (V) | 12 V | 24 V |
| Velocità massima | 6000 mm/min | — |
| Precisione dichiarata | 0.005 mm | 0.005 mm |
| Specifiche di categoria | ||
| Area di lavoro (lato corto) (mm) | 400 mm | 600 mm |
| Potenza nominale (W) | 5 W | 11 W |
| Tecnologia sorgente | Diodo | Diodo |
| Velocità massima di spostamento (mm/s) | 100 mm/s | — |
| Velocità massima di lavorazione (mm/s) | 100 mm/s | — |
| Profondità di taglio max per materiale | 5 mm (balsa wood), 3 mm (plywood) | — |
| Lunghezza d'onda (nm) | 455 nm | 455 nm |
| Risoluzione minima (µm) | 60 µm | — |
| Autofocus | False | False |
| Rotary incluso/compatibile | False | False |
| Passthrough | False | False |
| Software supportato | LightBurn, Altro | LightBurn, Altro |
| Ecosistema | ||
| Dipendenza dal cloud | No | No |
| Note software | Pienamente compatibile con LightBurn e LaserGRBL tramite connessione USB. La scheda madre a 32 bit gestisce automaticamente l'attivazione dell'Air Assist. | Pienamente compatibile con software standard del settore come LightBurn e LaserGRBL. La scheda madre a 32 bit supporta la connessione Bluetooth per eventuali espansioni o controlli wireless. |
Riconoscimenti MakerSpecs
S30 5W Laser Engraver
Maggiore area di lavoro Entry
La maggiore area di lavoro tra le macchine Laser a diodo (405–460 nm) entry-level: 1640 cm².
Come assegniamo i riconoscimenti →S30 Ultra 11W Laser Engraver
Nessun riconoscimento in questa fascia.
Le differenze che contano
- Prezzo: S30 5W Laser Engraver 299 € vs S30 Ultra 11W Laser Engraver 699 € — vince S30 5W Laser Engraver (+134%)
- Area di lavoro: S30 5W Laser Engraver 410×400 mm vs S30 Ultra 11W Laser Engraver 600×600 mm — vince S30 Ultra 11W Laser Engraver (+120%)
Quale scegliere
Scegli S30 Ultra 11W Laser Engraver se…
dai priorità a area di lavoro.
MakerSpecs è un atlante indipendente. Non vendiamo prodotti: questo confronto rimanda alle due schede, dove trovi i dati completi e i link ufficiali.