Sculpfun S30 5W Laser Engraver vs Sculpfun S30 Pro Max 20W
Confronto tecnico · Laser a diodo (405–460 nm)
S30 5W Laser Engraver e S30 Pro Max 20W non sono concorrenti diretti: prezzi molto diversi (~3×). S30 5W Laser Engraver costa meno (~299 €) ed è la scelta entry-level; S30 Pro Max 20W offre più capacità a un prezzo più alto (~899.99 €). Valuta in base al budget, non come confronto alla pari.
| Parametro |
S30 5W Laser Engraver
Sculpfun
F1 · Entry
|
S30 Pro Max 20W
Sculpfun
F2 · Intermedio
|
|---|---|---|
| Riconoscimenti | — | |
| Identità | ||
| Anno di lancio | 2022 | 2022 |
| Fascia d'uso | F1 — Entry | F2 — Intermedio |
| Prezzo | ||
| Prezzo (€) | 299 € | 899.99 € |
| Specifiche universali | ||
| Dimensioni (L×P×A) (cm) | 55.5 × 59.5 × 21 cm | 55.5 × 59.5 × 21 cm |
| Area di lavoro (mm) | 410 × 400 mm | 370 × 360 mm |
| Potenza (W) | 60 W | 120 W |
| Tensione (V) | 12 V | 240 V |
| Velocità massima | 6000 mm/min | 6000 mm/min |
| Precisione dichiarata | 0.005 mm | 0.005 mm |
| Specifiche di categoria | ||
| Area di lavoro (lato corto) (mm) | 400 mm | 360 mm |
| Potenza nominale (W) | 5 W | 20 W |
| Tecnologia sorgente | Diodo | Diodo |
| Velocità massima di spostamento (mm/s) | 100 mm/s | 100 mm/s |
| Velocità massima di lavorazione (mm/s) | 100 mm/s | 100 mm/s |
| Profondità di taglio max per materiale | 5 mm (balsa wood), 3 mm (plywood) | 12 mm (acrylic), 10 mm (wood) |
| Lunghezza d'onda (nm) | 455 nm | 455 nm |
| Risoluzione minima (µm) | 60 µm | 5 µm |
| Autofocus | False | False |
| Rotary incluso/compatibile | False | False |
| Passthrough | False | False |
| Software supportato | LightBurn, Altro | LightBurn, Altro |
| Ecosistema | ||
| Dipendenza dal cloud | No | No |
| Note software | Pienamente compatibile con LightBurn e LaserGRBL tramite connessione USB. La scheda madre a 32 bit gestisce automaticamente l'attivazione dell'Air Assist. | Pienamente compatibile con software standard come LightBurn e LaserGRBL tramite connessione USB o Bluetooth. Non impone l'uso di piattaforme proprietarie. |
Riconoscimenti MakerSpecs
S30 5W Laser Engraver
Maggiore area di lavoro Entry
La maggiore area di lavoro tra le macchine Laser a diodo (405–460 nm) entry-level: 1640 cm².
Come assegniamo i riconoscimenti →S30 Pro Max 20W
Nessun riconoscimento in questa fascia.
Le differenze che contano
- Prezzo: S30 5W Laser Engraver 299 € vs S30 Pro Max 20W 899.99 € — vince S30 5W Laser Engraver (+201%)
- Area di lavoro: S30 5W Laser Engraver 410×400 mm vs S30 Pro Max 20W 370×360 mm — vince S30 5W Laser Engraver (+23%)
Quale scegliere
Scegli S30 5W Laser Engraver se…
dai priorità a prezzo e area di lavoro.
MakerSpecs è un atlante indipendente. Non vendiamo prodotti: questo confronto rimanda alle due schede, dove trovi i dati completi e i link ufficiali.