Sherline 4400-DRO/4410-DRO 17" Benchtop Lathe with DRO vs Taig Micro Lathe II M1017
Comparaison technique · Tournage (tour)
4400-DRO/4410-DRO 17" Benchtop Lathe with DRO et Micro Lathe II M1017 sont deux tournage (tour) de classe similaire. Choisissez 4400-DRO/4410-DRO 17" Benchtop Lathe with DRO si distance between centers compte le plus ; choisissez Micro Lathe II M1017 si prix compte le plus.
| Paramètre |
4400-DRO/4410-DRO 17" Benchtop Lathe with DRO
Sherline
F2 · Intermédiaire
|
Micro Lathe II M1017
Taig
F2 · Intermédiaire
|
|---|---|---|
| Identité | ||
| Catégorie d'usage | F2 — Intermédiaire | F2 — Intermédiaire |
| Prix | ||
| Prix (€) | ~1000–1350 € | ~440–530 € |
| Spécifications universelles | ||
| Dimensions (L×P×H) (cm) | 26.7 × – × 21.6 cm | 39.37 × 41.91 × – cm |
| Poids (kg) | 13.6 kg | — |
| Surface de travail (mm) | 430 × 110 mm | — |
| Hauteur axe Z (mm) | — | 228.6 mm |
| Tension (V) | 240 V | — |
| Vitesse maximale | 2800 rpm | 7000 rpm |
| Précision annoncée | 0.0127 mm | 0.0127 mm |
| Spécifications de catégorie | ||
| Swing over bed (mm) | 90 mm | 114.3 mm |
| Distance between centers (mm) | 430 mm | 247.65 mm |
| Écosystème | ||
| Dépendance au cloud | Non | Non |
| Notes logiciel | — | Le tour est entièrement manuel : aucune commande CNC ni interface logicielle n'est prévue. Le moteur fourni entraîne la transmission à courroie trapézoïdale à six vitesses (525–5200 tr/min) ; tout réglage de vitesse supplémentaire nécessite un variateur externe au choix de l'utilisateur. |
Les différences qui comptent
- Prix: 4400-DRO/4410-DRO 17" Benchtop Lathe with DRO 1175 € vs Micro Lathe II M1017 485 € — Micro Lathe II M1017 l'emporte (+142%)
- Distance between centers: 4400-DRO/4410-DRO 17" Benchtop Lathe with DRO 430 mm vs Micro Lathe II M1017 247.65 mm — 4400-DRO/4410-DRO 17" Benchtop Lathe with DRO l'emporte (+74%)
- Swing over bed: 4400-DRO/4410-DRO 17" Benchtop Lathe with DRO 90 mm vs Micro Lathe II M1017 114.3 mm — Micro Lathe II M1017 l'emporte (+27%)
Lequel choisir
Choisissez 4400-DRO/4410-DRO 17" Benchtop Lathe with DRO si…
vous privilégiez distance between centers.
Choisissez Micro Lathe II M1017 si…
vous privilégiez prix et swing over bed.
MakerSpecs est un atlas indépendant. Nous ne vendons pas de produits : ce comparatif renvoie aux deux fiches, où vous trouverez les données complètes et les liens officiels.