S9 Laser Engraver vs S9 Pro Laser Engraver
Comparaison technique · Laser à diode (405–460 nm)
Tabella comparativa tra Sculpfun S9 Laser Engraver e Sculpfun S9 Pro Laser Engraver basata sui dati tecnici ufficiali per la lavorazione Laser à diode (405–460 nm).
| Paramètre |
S9 Laser Engraver
Sculpfun
F2 · Intermédiaire
|
S9 Pro Laser Engraver
Sculpfun
F2 · Intermédiaire
|
|---|---|---|
| Identité | ||
| Année de lancement | 2021 | 2022 |
| Catégorie d'usage | F2 — Intermédiaire | F2 — Intermédiaire |
| Prix | ||
| Prix (€) | 259 € | 499 € |
| Spécifications universelles | ||
| Dimensions (L×P×H) (cm) | 57 × 60 × 27 cm | — |
| Poids (kg) | 3 kg | 3 kg |
| Surface de travail (mm) | 410 × 415 mm | 400 × 410 mm |
| Puissance (W) | 30 W | 60 W |
| Tension (V) | — | 240 V |
| Précision annoncée | 0.01 mm | 0.01 mm |
| Spécifications de catégorie | ||
| Zone côté court (mm) | 410 mm | 400 mm |
| Puissance laser nominale (W) | 5.5 W | 10 W |
| Technologie source laser | diode | diode |
| Profondeur coupe matériau | Wood: 15mm, Acrylic: 10mm | 15mm wood, 10mm acrylic |
| Longueur d'onde laser (nm) | 450 nm | 450 nm |
| Résolution minimale atteignable (µm) | 10 µm | 10 µm |
| Système module autofocus | False | False |
| Module rotatif inclus | False | False |
| Interface logiciel contrôle | ['lightburn', 'other'] | ['lightburn', 'other'] |
| Écosystème | ||
| Dépendance au cloud | Non | Non |
| Notes logiciel | Entièrement compatible avec LightBurn et LaserGRBL (Windows uniquement), fonctionnant via le firmware GRBL standard sans restrictions propriétaires. | Compatible avec les principaux logiciels de gravure tels que LightBurn et LaserGRBL. Il se connecte via USB et prend en charge les fichiers aux formats NC, BMP, JPG, PNG et DXF. |
MakerSpecs è un atlante indipendente. Non vendiamo prodotti: questo confronto rimanda alle due schede, dove trovi i dati completi e i link ufficiali.