S30 Ultra 33W vs S9 Laser Engraver
Comparaison technique · Laser à diode (405–460 nm)
Tabella comparativa tra Sculpfun S30 Ultra 33W e Sculpfun S9 Laser Engraver basata sui dati tecnici ufficiali per la lavorazione Laser à diode (405–460 nm).
| Paramètre |
S30 Ultra 33W
Sculpfun
F2 · Intermédiaire
|
S9 Laser Engraver
Sculpfun
F2 · Intermédiaire
|
|---|---|---|
| Identité | ||
| Année de lancement | 2023 | 2021 |
| Catégorie d'usage | F2 — Intermédiaire | F2 — Intermédiaire |
| Prix | ||
| Prix (€) | 1299.99 € | 259 € |
| Spécifications universelles | ||
| Dimensions (L×P×H) (cm) | 80 × 84 × 22 cm | 57 × 60 × 27 cm |
| Poids (kg) | — | 3 kg |
| Surface de travail (mm) | 590 × 595 mm | 410 × 415 mm |
| Puissance (W) | 156 W | 30 W |
| Précision annoncée | 0.005 mm | 0.01 mm |
| Spécifications de catégorie | ||
| Zone côté court (mm) | 590 mm | 410 mm |
| Puissance laser nominale (W) | 33 W | 5.5 W |
| Technologie source laser | diode | diode |
| Profondeur coupe matériau | 20 mm (balsa wood), 15 mm (plywood), 15 mm (acrylic), 0.1 mm (steel) | Wood: 15mm, Acrylic: 10mm |
| Longueur d'onde laser (nm) | 455 nm | 450 nm |
| Résolution minimale atteignable (µm) | 5 µm | 10 µm |
| Système module autofocus | False | False |
| Module rotatif inclus | False | False |
| Fente passage structurelle | False | — |
| Interface logiciel contrôle | ['lightburn', 'other'] | ['lightburn', 'other'] |
| Écosystème | ||
| Dépendance au cloud | Non | Non |
| Notes logiciel | Compatible avec LightBurn et LaserGRBL via une connexion USB ou Bluetooth. Ne nécessite pas l'utilisation de logiciels propriétaires. | Entièrement compatible avec LightBurn et LaserGRBL (Windows uniquement), fonctionnant via le firmware GRBL standard sans restrictions propriétaires. |
MakerSpecs è un atlante indipendente. Non vendiamo prodotti: questo confronto rimanda alle due schede, dove trovi i dati completi e i link ufficiali.