S30 Ultra 33W vs S9 Pro Laser Engraver
Comparaison technique · Laser à diode (405–460 nm)
Tabella comparativa tra Sculpfun S30 Ultra 33W e Sculpfun S9 Pro Laser Engraver basata sui dati tecnici ufficiali per la lavorazione Laser à diode (405–460 nm).
| Paramètre |
S30 Ultra 33W
Sculpfun
F2 · Intermédiaire
|
S9 Pro Laser Engraver
Sculpfun
F2 · Intermédiaire
|
|---|---|---|
| Identité | ||
| Année de lancement | 2023 | 2022 |
| Catégorie d'usage | F2 — Intermédiaire | F2 — Intermédiaire |
| Prix | ||
| Prix (€) | 1299.99 € | 499 € |
| Spécifications universelles | ||
| Dimensions (L×P×H) (cm) | 80 × 84 × 22 cm | — |
| Poids (kg) | — | 3 kg |
| Surface de travail (mm) | 590 × 595 mm | 400 × 410 mm |
| Puissance (W) | 156 W | 60 W |
| Tension (V) | — | 240 V |
| Précision annoncée | 0.005 mm | 0.01 mm |
| Spécifications de catégorie | ||
| Zone côté court (mm) | 590 mm | 400 mm |
| Puissance laser nominale (W) | 33 W | 10 W |
| Technologie source laser | diode | diode |
| Profondeur coupe matériau | 20 mm (balsa wood), 15 mm (plywood), 15 mm (acrylic), 0.1 mm (steel) | 15mm wood, 10mm acrylic |
| Longueur d'onde laser (nm) | 455 nm | 450 nm |
| Résolution minimale atteignable (µm) | 5 µm | 10 µm |
| Système module autofocus | False | False |
| Module rotatif inclus | False | False |
| Fente passage structurelle | False | — |
| Interface logiciel contrôle | ['lightburn', 'other'] | ['lightburn', 'other'] |
| Écosystème | ||
| Dépendance au cloud | Non | Non |
| Notes logiciel | Compatible avec LightBurn et LaserGRBL via une connexion USB ou Bluetooth. Ne nécessite pas l'utilisation de logiciels propriétaires. | Compatible avec les principaux logiciels de gravure tels que LightBurn et LaserGRBL. Il se connecte via USB et prend en charge les fichiers aux formats NC, BMP, JPG, PNG et DXF. |
MakerSpecs è un atlante indipendente. Non vendiamo prodotti: questo confronto rimanda alle due schede, dove trovi i dati completi e i link ufficiali.