S30 Ultra 11W Laser Engraver vs S30 Ultra 33W
Comparaison technique · Laser à diode (405–460 nm)
Tabella comparativa tra Sculpfun S30 Ultra 11W Laser Engraver e Sculpfun S30 Ultra 33W basata sui dati tecnici ufficiali per la lavorazione Laser à diode (405–460 nm).
| Paramètre |
S30 Ultra 11W Laser Engraver
Sculpfun
F2 · Intermédiaire
|
S30 Ultra 33W
Sculpfun
F2 · Intermédiaire
|
|---|---|---|
| Identité | ||
| Année de lancement | 2023 | 2023 |
| Catégorie d'usage | F2 — Intermédiaire | F2 — Intermédiaire |
| Prix | ||
| Prix (€) | 699 € | 1299.99 € |
| Spécifications universelles | ||
| Dimensions (L×P×H) (cm) | 80 × 84 × 22 cm | 80 × 84 × 22 cm |
| Surface de travail (mm) | 600 × 600 mm | 590 × 595 mm |
| Puissance (W) | 84 W | 156 W |
| Tension (V) | 24 V | — |
| Précision annoncée | 0.005 mm | 0.005 mm |
| Spécifications de catégorie | ||
| Zone côté court (mm) | 600 mm | 590 mm |
| Puissance laser nominale (W) | 11 W | 33 W |
| Technologie source laser | diode | diode |
| Profondeur coupe matériau | — | 20 mm (balsa wood), 15 mm (plywood), 15 mm (acrylic), 0.1 mm (steel) |
| Longueur d'onde laser (nm) | 455 nm | 455 nm |
| Résolution minimale atteignable (µm) | — | 5 µm |
| Système module autofocus | False | False |
| Module rotatif inclus | False | False |
| Fente passage structurelle | False | False |
| Interface logiciel contrôle | ['lightburn', 'other'] | ['lightburn', 'other'] |
| Écosystème | ||
| Dépendance au cloud | Non | Non |
| Notes logiciel | Entièrement compatible avec les logiciels standards du secteur tels que LightBurn et LaserGRBL. La carte mère 32 bits prend en charge la connectivité Bluetooth pour un contrôle sans fil. | Compatible avec LightBurn et LaserGRBL via une connexion USB ou Bluetooth. Ne nécessite pas l'utilisation de logiciels propriétaires. |
MakerSpecs è un atlante indipendente. Non vendiamo prodotti: questo confronto rimanda alle due schede, dove trovi i dati completi e i link ufficiali.