S30 Pro 10W Laser Engraver vs S9 Pro Laser Engraver
Comparaison technique · Laser à diode (405–460 nm)
Tabella comparativa tra Sculpfun S30 Pro 10W Laser Engraver e Sculpfun S9 Pro Laser Engraver basata sui dati tecnici ufficiali per la lavorazione Laser à diode (405–460 nm).
| Paramètre |
S30 Pro 10W Laser Engraver
Sculpfun
F2 · Intermédiaire
|
S9 Pro Laser Engraver
Sculpfun
F2 · Intermédiaire
|
|---|---|---|
| Identité | ||
| Année de lancement | 2022 | 2022 |
| Catégorie d'usage | F2 — Intermédiaire | F2 — Intermédiaire |
| Prix | ||
| Prix (€) | 599.99 € | 499 € |
| Spécifications universelles | ||
| Dimensions (L×P×H) (cm) | 55.5 × 59.5 × 21 cm | — |
| Poids (kg) | — | 3 kg |
| Surface de travail (mm) | 385 × 380 mm | 400 × 410 mm |
| Puissance (W) | 84 W | 60 W |
| Tension (V) | 12 V | 240 V |
| Vitesse maximale | 25000 mm/min | — |
| Précision annoncée | 0.005 mm | 0.01 mm |
| Spécifications de catégorie | ||
| Zone côté court (mm) | 380 mm | 400 mm |
| Puissance laser nominale (W) | 10 W | 10 W |
| Technologie source laser | diode | diode |
| Profondeur coupe matériau | — | 15mm wood, 10mm acrylic |
| Longueur d'onde laser (nm) | 455 nm | 450 nm |
| Résolution minimale atteignable (µm) | — | 10 µm |
| Système module autofocus | False | False |
| Module rotatif inclus | False | False |
| Fente passage structurelle | False | — |
| Interface logiciel contrôle | ['lightburn', 'other'] | ['lightburn', 'other'] |
| Écosystème | ||
| Dépendance au cloud | Non | Non |
| Notes logiciel | Entièrement compatible avec LightBurn et LaserGRBL pour les systèmes Windows et macOS. La carte mère 32 bits peut gérer automatiquement l'activation de l'Air Assist. | Compatible avec les principaux logiciels de gravure tels que LightBurn et LaserGRBL. Il se connecte via USB et prend en charge les fichiers aux formats NC, BMP, JPG, PNG et DXF. |
MakerSpecs è un atlante indipendente. Non vendiamo prodotti: questo confronto rimanda alle due schede, dove trovi i dati completi e i link ufficiali.