Sculpfun S30 10W vs S30 Ultra 33W
Comparaison technique · Laser à diode (405–460 nm)
Tabella comparativa tra Sculpfun Sculpfun S30 10W e Sculpfun S30 Ultra 33W basata sui dati tecnici ufficiali per la lavorazione Laser à diode (405–460 nm).
| Paramètre |
Sculpfun S30 10W
Sculpfun
F2 · Intermédiaire
|
S30 Ultra 33W
Sculpfun
F2 · Intermédiaire
|
|---|---|---|
| Identité | ||
| Année de lancement | 2022 | 2023 |
| Catégorie d'usage | F2 — Intermédiaire | F2 — Intermédiaire |
| Prix | ||
| Prix (€) | 599.99 € | 1299.99 € |
| Spécifications universelles | ||
| Dimensions (L×P×H) (cm) | 55.5 × 59.5 × 21 cm | 80 × 84 × 22 cm |
| Surface de travail (mm) | 380 × 385 mm | 590 × 595 mm |
| Puissance (W) | 84 W | 156 W |
| Tension (V) | 240 V | — |
| Vitesse maximale | 25000 mm/min | — |
| Précision annoncée | 0.005 mm | 0.005 mm |
| Spécifications de catégorie | ||
| Zone côté court (mm) | 380 mm | 590 mm |
| Puissance laser nominale (W) | 10 W | 33 W |
| Technologie source laser | diode | diode |
| Profondeur coupe matériau | — | 20 mm (balsa wood), 15 mm (plywood), 15 mm (acrylic), 0.1 mm (steel) |
| Longueur d'onde laser (nm) | 455 nm | 455 nm |
| Résolution minimale atteignable (µm) | 5 µm | 5 µm |
| Système module autofocus | False | False |
| Module rotatif inclus | False | False |
| Fente passage structurelle | — | False |
| Interface logiciel contrôle | ['lightburn', 'other'] | ['lightburn', 'other'] |
| Écosystème | ||
| Dépendance au cloud | Non | Non |
| Notes logiciel | La carte mère 32 bits est entièrement compatible avec LightBurn (y compris le contrôle d'air M8) et LaserGRBL. Elle prend également en charge la connectivité Bluetooth et l'impression hors ligne via une carte SD. | Compatible avec LightBurn et LaserGRBL via une connexion USB ou Bluetooth. Ne nécessite pas l'utilisation de logiciels propriétaires. |
MakerSpecs è un atlante indipendente. Non vendiamo prodotti: questo confronto rimanda alle due schede, dove trovi i dati completi e i link ufficiali.