Sculpfun S10 vs S9 Laser Engraver
Comparaison technique · Laser à diode (405–460 nm)
Tabella comparativa tra Sculpfun Sculpfun S10 e Sculpfun S9 Laser Engraver basata sui dati tecnici ufficiali per la lavorazione Laser à diode (405–460 nm).
| Paramètre |
Sculpfun S10
Sculpfun
F2 · Intermédiaire
|
S9 Laser Engraver
Sculpfun
F2 · Intermédiaire
|
|---|---|---|
| Identité | ||
| Année de lancement | 2022 | 2021 |
| Catégorie d'usage | F2 — Intermédiaire | F2 — Intermédiaire |
| Prix | ||
| Prix (€) | 469.99 € | 259 € |
| Spécifications universelles | ||
| Dimensions (L×P×H) (cm) | — | 57 × 60 × 27 cm |
| Poids (kg) | 3.42 kg | 3 kg |
| Surface de travail (mm) | 410 × 400 mm | 410 × 415 mm |
| Puissance (W) | 36 W | 30 W |
| Précision annoncée | 0.01 mm | 0.01 mm |
| Spécifications de catégorie | ||
| Zone côté court (mm) | 400 mm | 410 mm |
| Puissance laser nominale (W) | 10 W | 5.5 W |
| Technologie source laser | diode | diode |
| Profondeur coupe matériau | — | Wood: 15mm, Acrylic: 10mm |
| Longueur d'onde laser (nm) | 455 nm | 450 nm |
| Résolution minimale atteignable (µm) | 10 µm | 10 µm |
| Système module autofocus | False | False |
| Module rotatif inclus | False | False |
| Fente passage structurelle | False | — |
| Interface logiciel contrôle | ['lightburn', 'other'] | ['lightburn', 'other'] |
| Écosystème | ||
| Dépendance au cloud | Non | Non |
| Notes logiciel | Compatible avec les principaux logiciels de gravure tels que LightBurn et LaserGRBL. Elle se connecte via un port USB et ne prend pas en charge l'utilisation hors ligne avec des cartes mémoire SD. | Entièrement compatible avec LightBurn et LaserGRBL (Windows uniquement), fonctionnant via le firmware GRBL standard sans restrictions propriétaires. |
MakerSpecs è un atlante indipendente. Non vendiamo prodotti: questo confronto rimanda alle due schede, dove trovi i dati completi e i link ufficiali.