Proxxon Precision Lathe PD 250/E vs Taig 4029CR CNC-Ready Lathe
Comparaison technique · Tournage (tour)
Precision Lathe PD 250/E et 4029CR CNC-Ready Lathe sont deux tournage (tour) de classe similaire. Choisissez Precision Lathe PD 250/E si prix compte le plus ; choisissez 4029CR CNC-Ready Lathe si swing over bed compte le plus.
| Paramètre |
Precision Lathe PD 250/E
Proxxon
F2 · Intermédiaire
|
4029CR CNC-Ready Lathe
Taig
F2 · Intermédiaire
|
|---|---|---|
| Identité | ||
| Catégorie d'usage | F2 — Intermédiaire | F2 — Intermédiaire |
| Prix | ||
| Prix (€) | ~1050–1370 € | ~1950–2050 € |
| Spécifications universelles | ||
| Dimensions (L×P×H) (cm) | 27 × 56 × 17 cm | 60.96 × 78.74 × 35.56 cm |
| Poids (kg) | 12 kg | 40.82 kg |
| Hauteur axe Z (mm) | — | 152.4 mm |
| Puissance (W) | 150 W | 186 W |
| Tension (V) | 230 V | 110 V |
| Vitesse maximale | 3000 rpm | 1800 rpm |
| Précision annoncée | 0.05 mm | 0.00508 mm |
| Spécifications de catégorie | ||
| Swing over bed (mm) | 70 mm | 88.9 mm |
| Distance between centers (mm) | 250 mm | 152.4 mm |
| Écosystème | ||
| Dépendance au cloud | Non | Non |
| Notes logiciel | — | Le 4029CR est livré sans contrôleur ni logiciel : l'intégration du système de commande est entièrement à la charge de l'utilisateur. Il est compatible avec les solutions courantes dans l'écosystème Taig et des constructeurs DIY, notamment Mach3, Mach4 et LinuxCNC, associés à des drivers pour moteurs NEMA 23 (supports moteurs inclus). Le choix du logiciel dépend entièrement du matériel de commande retenu. |
Les différences qui comptent
- Prix: Precision Lathe PD 250/E 1210 € vs 4029CR CNC-Ready Lathe 2000 € — Precision Lathe PD 250/E l'emporte (+65%)
- Distance between centers: Precision Lathe PD 250/E 250 mm vs 4029CR CNC-Ready Lathe 152.4 mm — Precision Lathe PD 250/E l'emporte (+64%)
- Swing over bed: Precision Lathe PD 250/E 70 mm vs 4029CR CNC-Ready Lathe 88.9 mm — 4029CR CNC-Ready Lathe l'emporte (+27%)
Lequel choisir
Choisissez Precision Lathe PD 250/E si…
vous privilégiez prix et distance between centers.
Choisissez 4029CR CNC-Ready Lathe si…
vous privilégiez swing over bed.
MakerSpecs est un atlas indépendant. Nous ne vendons pas de produits : ce comparatif renvoie aux deux fiches, où vous trouverez les données complètes et les liens officiels.