Plasma cutting
55A Non-HF Plasma Cutter
Tomahawk 45
Lincoln Electric
K5458-1
Plasma cutting
F3 · Advanced
Portable plasma cutter for cutting and gouging mild steel, stainless steel, aluminum, brass and copper. On mild steel the recommended cut reaches 12.7 mm and the maximum cut 15.9 mm. The arc starts by touch, without high frequency, and the Parts-in-Place system checks that the consumables are fitted before cutting. It runs on compressed air or nitrogen, so a gas supply is needed on site.
Data from official source
Price not available
MakerSpecs doesn't sell and doesn't show store prices: check the price where you buy.
Data verified
Specifiche tecniche
Dimensions
22 × 48 × 39 cm (8.5 × 18.9 × 15.2 in)
Weight
15.42 kg (34.0 lb)
| Parameter | Value | Source |
|---|---|---|
| Machine dimensions | 22 × 48 × 39 cm (8.5 × 18.9 × 15.2 in) | manufacturer website |
| Weight | 15.42 kg (34.0 lb) | manufacturer website |
| Power supply | 230 V / 60 Hz | manufacturer website |
| Max current | 45 A | Compiled by editorial team |
| Max cut thickness (mild steel) | 15.9 mm | Compiled by editorial team |
| Required gases | Air or Nitrogen | Compiled by editorial team |
| Duty cycle | 45 % | Compiled by editorial team |
How we verify this sheet
Technical data verified on the manufacturer's official website (recording date shown above). Description, editorial notes and translations are written with the help of AI and reviewed by the author before publication: the numbers always come from the cited source. Read the full methodology →
Compare
Similar machines to consider
Updates to this sheet and Manufacturer Notes
-
Sheet published Specifications updated: immagine, foto candidate
-
Specifications updated: alimentazione, peso, dimensioni, form factor,