This mill/drill is built for metalworking with an R8 spindle, which accepts end mills, drill chucks and collets. The motor is a single-phase induction motor. The table has four T-slots and the spindle speed range is divided into 12 steps, from slow high-torque work to fast finishing. The base is made of certified Meehanite cast iron.
MakerSpecs doesn't sell and doesn't show store prices: check the price where you buy.
| Parameter | Value | Source |
|---|---|---|
| Power supply | 115 V | manufacturer website |
| Work area | 356 × 152 × 89 mm (14.0 × 6.0 × 3.5 in) | manufacturer website |
| Maximum speed | 2580 rpm | manufacturer website |
| Spindle travel | 88.9 mm | Compiled by editorial team |
| RPM | 2580 rpm | Compiled by editorial team |
| Spindle taper | R8 | Compiled by editorial team |
| Table travel X/Y | 14 in x 6 in (355.6 x 152.4 mm) | Compiled by editorial team |
Technical data verified on the manufacturer's official website (recording date shown above). Description, editorial notes and translations are written with the help of AI and reviewed by the author before publication: the numbers always come from the cited source. Read the full methodology →
