Plasma cutting
CUT55 MP
Powermax30 XP
Plasma cutting
F2 · Intermediate
The Powermax30 XP is an inverter plasma cutter with adjustable output current. It runs on clean, dry, oil-free air or on nitrogen. On mild steel the recommended cut reaches 12 mm and the severance cut 16 mm. It connects to a single-phase supply at either 120 or 240 V: the duty cycle is 20% at 120 V and 35% at 240 V. Full output from an engine-driven generator requires 5.5 kW.
Data from official source
Price not available
MakerSpecs doesn't sell and doesn't show store prices: check the price where you buy.
Data verified
Specifiche tecniche
Dimensions
14 × 36 × 29 cm (5.5 × 14.0 × 11.5 in)
Weight
9.5 kg (20.9 lb)
| Parameter | Value | Source |
|---|---|---|
| Machine dimensions | 14 × 36 × 29 cm (5.5 × 14.0 × 11.5 in) | manufacturer website |
| Weight | 9.5 kg (20.9 lb) | manufacturer website |
| Max current | 30 A | Compiled by editorial team |
| Max cut thickness (mild steel) | 16 mm | Compiled by editorial team |
| Required gases | Aria pulita, secca e priva di olio, oppure azoto | Compiled by editorial team |
| Duty cycle | 35 % | Compiled by editorial team |
How we verify this sheet
Technical data verified on the manufacturer's official website (recording date shown above). Description, editorial notes and translations are written with the help of AI and reviewed by the author before publication: the numbers always come from the cited source. Read the full methodology →
Compare
Similar machines to consider
Plasma cutting
CUT65
Plasma cutting
55A Non-HF Plasma Cutter
Plasma cutting
60A NON-HF Plasma Cutter
Updates to this sheet and Manufacturer Notes
-
Sheet published
-
Specifications updated: immagine, foto candidate, peso, dimensioni,