S30 Pro 10W Laser Engraver vs S9 Laser Engraver
Technical comparison · Diode laser (405–460 nm)
Tabella comparativa tra Sculpfun S30 Pro 10W Laser Engraver e Sculpfun S9 Laser Engraver basata sui dati tecnici ufficiali per la lavorazione Diode laser (405–460 nm).
| Parameter |
S30 Pro 10W Laser Engraver
Sculpfun
F2 · Intermediate
|
S9 Laser Engraver
Sculpfun
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2022 | 2021 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | 599.99 € | 259 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 55.5 × 59.5 × 21 cm | 57 × 60 × 27 cm |
| Weight (kg) | — | 3 kg |
| Work area (mm) | 385 × 380 mm | 410 × 415 mm |
| Power (W) | 84 W | 30 W |
| Voltage (V) | 12 V | — |
| Maximum speed | 25000 mm/min | — |
| Declared precision | 0.005 mm | 0.01 mm |
| Category specs | ||
| Short side area (mm) | 380 mm | 410 mm |
| Nominal laser power (W) | 10 W | 5.5 W |
| Laser source technology | diode | diode |
| Cut depth per material | — | Wood: 15mm, Acrylic: 10mm |
| Laser wavelength (nm) | 455 nm | 450 nm |
| Minimum achievable resolution (µm) | — | 10 µm |
| Autofocus system module | False | False |
| Rotary module included | False | False |
| Passthrough structural slot | False | — |
| Control software interface | ['lightburn', 'other'] | ['lightburn', 'other'] |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | Fully compatible with LightBurn and LaserGRBL for Windows and macOS systems. The 32-bit motherboard can automatically manage the Air Assist activation. | Fully compatible with LightBurn and LaserGRBL (Windows only), operating via standard GRBL firmware without proprietary restrictions. |
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.