Sculpfun S30 10W vs xTool M1 10W Hybrid Laser Cutter
Technical comparison · Diode laser (405–460 nm)
S30 10W leads on the available specs (starting with price); M1 10W Hybrid Laser Cutter makes sense only for non-technical reasons (availability, support, ecosystem), or if the missing data matters in your case.
| Parameter |
S30 10W
Sculpfun
F2 · Intermediate
|
M1 10W Hybrid Laser Cutter
xTool
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2022 | 2022 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | 599.99 € | ~700–900 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 55.5 × 59.5 × 21 cm | 55.7 × 45.3 × 23 cm |
| Weight (kg) | — | 10 kg |
| Work area (mm) | 380 × 385 mm | 385 × 300 mm |
| Z-axis height (mm) | — | 16 mm |
| Power (W) | 84 W | 84 W |
| Voltage (V) | 240 V | 240 V |
| Maximum speed | 25000 mm/min | 250 mm/s |
| Declared precision | 0.005 mm | 0.01 mm |
| Category specs | ||
| Work area (short side) (mm) | 380 mm | 300 mm |
| Rated power (W) | 10 W | 10 W |
| Source technology | Diode | Diode |
| Max travel speed (mm/s) | — | 250 mm/s |
| Max processing speed (mm/s) | — | 250 mm/s |
| Max cut depth per material | — | 8 mm basswood |
| Wavelength (nm) | 455 nm | 455 nm |
| Min resolution (µm) | 5 µm | 10 µm |
| Autofocus | False | True |
| Rotary included/compatible | False | False |
| Passthrough | — | False |
| Supported software | LightBurn, Other | Proprietary |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The 32-bit motherboard is fully compatible with LightBurn (including M8 air control) and LaserGRBL. It also supports Bluetooth connectivity and offline printing via SD card. | Control of the device relies exclusively on the proprietary xTool Creative Space (XCS) software. This application is designed to be intuitive and accessible for beginners, integrating features for managing the internal 16-megapixel camera, visual project alignment, and automatic focusing. Unlike many other commercial laser systems, this model does not natively support LightBurn or open-source GRBL-based firmware. Consequently, advanced users accustomed to complex workflows might find the software somewhat restrictive when handling intricate vector files or deep engraving parameters that require highly customized optimization. |
The differences that matter
- Price: S30 10W 599.99 € vs M1 10W Hybrid Laser Cutter 800 € — S30 10W wins (+33%)
- Work area: S30 10W 380×385 mm vs M1 10W Hybrid Laser Cutter 385×300 mm — S30 10W wins (+27%)
Which one to choose
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.