Prusa Research MK4S vs Qidi Tech Q2 3D Printer
Technical comparison · Fused filament fabrication (FFF/FDM)
Q2 3D Printer leads on the available specs (starting with price); MK4S makes sense only for non-technical reasons (availability, support, ecosystem), or if the missing data matters in your case. On the category's overall technical index, Q2 3D Printer scores 62/100 against 17/100 for MK4S.
| Parameter |
MK4S
Prusa Research
F2 · Intermediate
|
Q2 3D Printer
Qidi Tech
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2025 | 2025 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | 999 € | 499 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 50 × 55 × 40 cm | 40.2 × 43.8 × 49.4 cm |
| Weight (kg) | — | 18.1 kg |
| Work area (mm) | 250 × 210 mm | 270 × 270 mm |
| Z-axis height (mm) | 220 mm | 256 mm |
| Power (W) | — | 630 W |
| Voltage (V) | 230 V | — |
| Maximum speed | 500 mm/s | 600 mm/s |
| Category specs | ||
| Footprint X×Y (short side) (mm) | — | 270 mm |
| Build height Z (mm) | — | 256 mm |
| Kinematics | Cartesian | CoreXY |
| Max nozzle temperature (°C) | — | 370 °C |
| Max bed temperature (°C) | — | 120 °C |
| Max print speed (mm/s) | — | 600 mm/s |
| Enclosed chamber | False | True |
| Filament sensor | — | True |
| Auto bed leveling | — | Mesh |
| Standard nozzle diameter (mm) | — | 0.4 mm |
| Multi-extruder | False | False |
| Native Klipper | False | True |
| Input shaper | — | True |
| Multicolor printing | True | True |
| Multicolor requires accessory | True | True |
| Max colors | — | 16 |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | PrusaSlicer (optimized) and Prusa Connect for remote control. The machine accepts G-code from any slicer (Cura, Simplify3D) and communicates via USB, Ethernet or Wi-Fi using an open Marlin-based protocol. Compatible with OctoPrint and offline management. Does not require a Prusa account to print, unlike machines with proprietary firmware that block features without connection. | The system is natively supported by QIDI Studio, a slicing software derived from PrusaSlicer and Orca Slicer, providing a modern interface and advanced features. The open architecture still allows the use of third-party slicing solutions. Network connectivity, via Wi-Fi or Ethernet, facilitates direct remote printing and monitoring, aided by the built-in camera. |
The differences that matter
- Price: MK4S 999 € vs Q2 3D Printer 499 € — Q2 3D Printer wins (+100%)
- Enclosed chamber: Q2 3D Printer yes, MK4S no
- Work area: MK4S 250×210 mm vs Q2 3D Printer 270×270 mm — Q2 3D Printer wins (+39%)
- Native Klipper: Q2 3D Printer yes, MK4S no
Which one to choose
Choose Q2 3D Printer if…
you value price, enclosed chamber and work area.
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.