Lithoz CeraFab System S65 vs Wasp WASP 40100 LDM
Technical comparison · 3D printing with clay & ceramics
WASP 40100 LDM leads on the available specs (starting with work area); CeraFab System S65 makes sense only for non-technical reasons (availability, support, ecosystem), or if the missing data matters in your case.
| Parameter |
CeraFab System S65
Lithoz
F2 · Intermediate
|
WASP 40100 LDM
Wasp
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | — | 8590 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 85 × 105 × 178 cm | 85 × 77 × 195 cm |
| Weight (kg) | — | 84 kg |
| Work area (mm) | 102 × 64 mm | 400 × 400 mm |
| Z-axis height (mm) | 320 mm | 1000 mm |
| Power (W) | — | 200 W |
| Voltage (V) | — | 240 V |
| Maximum speed | — | 150 mm/s |
| Declared precision | 40 um | 0.5 mm |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The Lithoz management software is integrated into a proprietary workflow optimized for the ceramic photopolymerization process, essential for precise control of UV exposure. It is not compatible with open-source firmware or slicers such as Cura or PrusaSlicer, as the system requires specific slice parameters for the loading density of the ceramic material and the polymerization behavior of the loaded resin. Support management and file preparation are optimized to prevent warping during the subsequent debinding and sintering phase in the oven. | The machine uses Simplify3D as its official, licensed slicer, whose workflow is optimized to handle the specific parameters of fluid-dense materials via the screw extruder. The system supports remote management via the network and monitoring via a TFT touchscreen interface, with control logic that allows for the configuration of variable retractions and flows, critical when working with ceramics, porcelain, or geopolymers. |
The differences that matter
- Work area: CeraFab System S65 102×64 mm vs WASP 40100 LDM 400×400 mm — WASP 40100 LDM wins (+2351%)
Which one to choose
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.