Lithoz CeraFab System S65 vs StoneFlower StoneFlower 4.0
Technical comparison · 3D printing with clay & ceramics
StoneFlower 4.0 is the one with the largest build area in its class. StoneFlower 4.0 leads on the available specs (starting with work area); CeraFab System S65 makes sense only for non-technical reasons (availability, support, ecosystem), or if the missing data matters in your case.
| Parameter |
CeraFab System S65
Lithoz
F2 · Intermediate
|
StoneFlower 4.0
StoneFlower
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | — | 5439 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 85 × 105 × 178 cm | 87 × 92 × 210 cm |
| Weight (kg) | — | 40 kg |
| Work area (mm) | 102 × 64 mm | 500 × 500 mm |
| Z-axis height (mm) | 320 mm | 500 mm |
| Power (W) | — | 500 W |
| Voltage (V) | — | 230 V |
| Maximum speed | — | 150 mm/s |
| Declared precision | 40 um | — |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The Lithoz management software is integrated into a proprietary workflow optimized for the ceramic photopolymerization process, essential for precise control of UV exposure. It is not compatible with open-source firmware or slicers such as Cura or PrusaSlicer, as the system requires specific slice parameters for the loading density of the ceramic material and the polymerization behavior of the loaded resin. Support management and file preparation are optimized to prevent warping during the subsequent debinding and sintering phase in the oven. | The firmware is based on the Duet 6HC electronics, compatible with the G-code standard, which allows the use of widely used slicers such as Cura, PrusaSlicer, Slic3r, and SuperSlicer. This open architecture gives the user complete control over extrusion parameters and print profiles, avoiding the restrictions typical of closed proprietary software. |
The differences that matter
- Work area: CeraFab System S65 102×64 mm vs StoneFlower 4.0 500×500 mm — StoneFlower 4.0 wins (+3730%)
Which one to choose
Choose StoneFlower 4.0 if…
you value work area. It is the one with the largest build area in its class.
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.