Lincoln Electric POWER MIG 140C vs Telwin MASTERMIG 400
Technical comparison · MIG/MAG welding (wire feed)
POWER MIG 140C and MASTERMIG 400 are not direct competitors: different use classes (F2 vs F4). POWER MIG 140C costs less (~€850) and is the entry-level choice; MASTERMIG 400 offers more capability at a higher price (~€2200). Judge them by budget, not head-to-head.
| Parameter |
POWER MIG 140C
Lincoln Electric
F2 · Intermediate
|
MASTERMIG 400
Telwin
F4 · Semi-professional
|
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F4 — Semi-professional |
| Price | ||
| Price (€) | ~750–950 € | ~1900–2500 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 25.8 × 47.2 × 35.6 cm | 56.5 × 94.5 × 83 cm |
| Weight (kg) | 26.3 kg | 104 kg |
| Power (W) | — | 20000 W |
| Voltage (V) | 120 V | 400 V |
| Maximum speed | 12700 mm/min | 20000 mm/min |
| Category specs | ||
| Welding type | MIG/MAG | MIG/MAG |
| Max wire feed speed (m/min) | 12.7 m/min | — |
| Max welding current (A) | 140 A | 400 A |
| Max wire diameter (mm) | 0.9 mm | 1.6 mm |
| Duty cycle (rated current) (%) | 20 % | 25 % |
| Synergic control | False | False |
| Gasless capable | True | — |
| Power source technology | Transformer | Transformer |
| Aluminium ready | True | True |
| Pulse capable | False | False |
| Input voltage | — | 400 V (three-phase) |
| Supported spool | Ø200 mm (~5 kg) | Ø300 mm (~15 kg) |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | As a traditional analog welding power source, the POWER MIG 140C does not feature digital interfaces, cloud connectivity, or management software. All settings, including wire feed speed and arc voltage, are adjusted manually using the dials on the front control panel. Setup relies entirely on the operator's experience or the parameter chart conveniently printed on the inside of the wire spool door. There are no menus, LCD screens, or synergic control functions that would require firmware updates. This purely electromechanical architecture ensures significant longevity and simplified maintenance over time, without the risk of software obsolescence typical of modern digitized machines. | — |
The differences that matter
- Price: POWER MIG 140C 850 € vs MASTERMIG 400 2200 € — POWER MIG 140C wins (+159%)
- Max wire diameter: POWER MIG 140C 0.9 mm vs MASTERMIG 400 1.6 mm — MASTERMIG 400 wins (+78%)
Which one to choose
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.