Jet JDP-17MF vs Jet J-2500
Technical comparison · Drill press (column drill)
JDP-17MF leads on the available specs (starting with price); J-2500 makes sense only for non-technical reasons (availability, support, ecosystem), or if the missing data matters in your case.
| Parameter |
JDP-17MF
Jet
F2 · Intermediate
|
J-2500
Jet
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | ~500–700 € | ~1050–1250 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | — | 33.02 × 78.74 × 160.02 cm |
| Weight (kg) | 85.62 kg | 75.65 kg |
| Work area (mm) | — | 292.1 × 292.1 mm |
| Z-axis height (mm) | — | 85.73 mm |
| Power (W) | — | 559.27 W |
| Voltage (V) | 115 V | 115 V |
| Maximum speed | 3630 rpm | 3630 rpm |
| Category specs | ||
| Spindle travel (mm) | 111.1 mm | 85.73 mm |
| Spindle to column (mm) | 209.5 mm | 190.5 mm |
| RPM (rpm) | 3630 rpm | 3630 rpm |
| Spindle taper | MT-2 | MT-2 |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The machine is fully analog and mechanical, with no digital components or control interfaces requiring the use of external software. Speed and positioning control is done manually using levers, cranks, and by repositioning the transmission belts. | Purely electromechanical machine tool operating without digital control boards, microprocessors, or cloud connectivity. The machine requires no software, drivers, or digital setup to function. Speed adjustments are executed completely manually by repositioning the drive belt along the pulley steps and tensioning the motor assembly. |
The differences that matter
- Price: JDP-17MF 600 € vs J-2500 1150 €
Which one to choose
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.