Grizzly Industrial G0704 vs Grizzly Industrial G0705 8" x 29" 2 HP Mill/Drill with Stand
Technical comparison · Mill-drill machine
G0705 8" x 29" 2 HP Mill/Drill with Stand is the one with the largest build area in its class. G0705 8" x 29" 2 HP Mill/Drill with Stand leads on the available specs (starting with work area); G0704 makes sense only for non-technical reasons (availability, support, ecosystem), or if the missing data matters in your case.
| Parameter |
G0704
Grizzly Industrial
F3 · Advanced
|
|
|---|---|---|
| Identity | ||
| Use tier | F3 — Advanced | F3 — Advanced |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 96.52 × 86.36 × 170.18 cm | 105.7 × 102.9 × 170.2 cm |
| Work area (mm) | 479.43 × 174.63 mm | 500 × 190.5 mm |
| Z-axis height (mm) | 279.4 mm | — |
| Power (W) | 746 W | — |
| Voltage (V) | 110 V | — |
| Maximum speed | 2250 rpm | 2436 rpm |
| Category specs | ||
| Spindle travel (mm) | 50.8 mm | 119.1 mm |
| Spindle to column (mm) | 190.5 mm | 196.9 mm |
| RPM (rpm) | 2250 rpm | 2436 rpm |
| Spindle taper | R-8 | R-8 |
| Table travel X/Y | 479.43 x 174.63 mm | 500 x 190.5 mm |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | A manual machine with no numerical control: you work with handwheels and dials reading inches. It is, however, one of the most used bases for DIY CNC conversions, with third-party kits and GRBL, Mach3 or LinuxCNC controllers; the conversion is not supported by Grizzly. | — |
The differences that matter
- Work area: G0704 479.43×174.63 mm vs G0705 8" x 29" 2 HP Mill/Drill with Stand 500×190.5 mm
Which one to choose
Choose G0705 8" x 29" 2 HP Mill/Drill with Stand if…
you value work area. It is the one with the largest build area in its class.
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.