Bosch PDB 40 vs Jet JDP-15F
Technical comparison · Drill press (column drill)
PDB 40 leads on the available specs (starting with price); JDP-15F makes sense only for non-technical reasons (availability, support, ecosystem), or if the missing data matters in your case.
| Parameter |
PDB 40
Bosch
F2 · Intermediate
|
JDP-15F
Jet
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2011 | — |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | ~300–420 € | ~650–850 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 33 × 35 × 65 cm | 50.8 × 78.7 × 162.5 cm |
| Weight (kg) | 11.2 kg | 73 kg |
| Work area (mm) | 330 × 350 mm | 330 × 330 mm |
| Z-axis height (mm) | 90 mm | — |
| Power (W) | 710 W | 560 W |
| Voltage (V) | 230 V | 115 V |
| Maximum speed | 2500 rpm | 3600 rpm |
| Category specs | ||
| Spindle travel (mm) | 90 mm | 85 mm |
| Spindle to column (mm) | 125 mm | 190 mm |
| RPM (rpm) | 2500 rpm | 3600 rpm |
| Spindle taper | — | MT-2 |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The equipment does not require or support computer connectivity, external control software, or firmware configurations, operating as a standalone benchtop power tool. Operational feedback is managed through an integrated electronic module featuring a digital display on the front panel of the drilling head. This screen allows the user to monitor real-time rotational speed in revolutions per minute and exact drilling depth during spindle lowering. Zero-point calibration for depth measurement is executed directly via physical push buttons adjacent to the display panel, ensuring rapid, intuitive workflow monitoring without external digital dependencies. | As a conventional electromechanical floor drill press, this machine neither uses nor supports any software, firmware, or digital control interfaces. It features no data ports, integrated microcontrollers, or wireless connectivity. All operational procedures are strictly manual, executed via the primary power switch and the three-spoke feed handle. Spindle speed adjustments require unlocking the motor mount, manually repositioning the drive belts across the step pulleys, and retensioning the system. Consequently, the tool remains completely immune to software deprecation, connectivity issues, or digital maintenance requirements. |
The differences that matter
- Price: PDB 40 360 € vs JDP-15F 750 €
- Work area: PDB 40 330×350 mm vs JDP-15F 330×330 mm
Which one to choose
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.