Artillery Sidewinder SW-X2 3D Printer vs Prusa Research MK4S 3D Printer kit
Technical comparison · Fused filament fabrication (FFF/FDM)
Sidewinder SW-X2 3D Printer leads on the available specs (starting with price); MK4S 3D Printer kit makes sense only for non-technical reasons (availability, support, ecosystem), or if the missing data matters in your case.
| Parameter |
Sidewinder SW-X2 3D Printer
Artillery
F2 · Intermediate
|
MK4S 3D Printer kit
Prusa Research
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2021 | 2025 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | ~250–320 € | 819 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | — | 50 × 55 × 40 cm |
| Weight (kg) | — | 7 kg |
| Work area (mm) | 300 × 300 mm | 250 × 210 mm |
| Z-axis height (mm) | 400 mm | 220 mm |
| Power (W) | — | 240 W |
| Voltage (V) | — | 230 V |
| Maximum speed | — | 500 mm/s |
| Category specs | ||
| Footprint X×Y (short side) (mm) | — | 250 mm |
| Build height Z (mm) | — | 220 mm |
| Kinematics | — | Cartesian |
| Max nozzle temperature (°C) | — | 290 °C |
| Max bed temperature (°C) | — | 120 °C |
| Max print speed (mm/s) | — | 500 mm/s |
| Enclosed chamber | — | False |
| Filament sensor | — | True |
| Auto bed leveling | — | Mesh |
| Standard nozzle diameter (mm) | — | 0.4 mm |
| Multi-extruder | — | False |
| Native Klipper | — | False |
| Input shaper | — | True |
| Multicolor printing | — | True |
| Multicolor requires accessory | — | True |
| Max colors | — | 5 |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | Compatible with any slicer that generates standard G-code, such as Cura, PrusaSlicer, Simplify3D, IdeaMaker. The machine uses open-source Marlin 2.0 firmware with no proprietary locks. The communication protocol is standard USB serial, not GRBL, with profiles widely documented by the community. | The MK4S runs proprietary Prusa firmware based on Marlin, not GRBL. It is managed through PrusaSlicer (with over 180 official profiles included), Simplify3D, or Cura with community profiles. Files are loaded via USB, local network, or PrusaConnect and the Prusa mobile app; it is not compatible with LightBurn or LaserGRBL, being a filament printer. The machine can run fully offline with no cloud dependency, and receives regular firmware updates along with pre-tuned profiles for Prusament materials. |
The differences that matter
- Price: Sidewinder SW-X2 3D Printer 285 € vs MK4S 3D Printer kit 819 € — Sidewinder SW-X2 3D Printer wins (+187%)
- Work area: Sidewinder SW-X2 3D Printer 300×300 mm vs MK4S 3D Printer kit 250×210 mm — Sidewinder SW-X2 3D Printer wins (+71%)
Which one to choose
Choose Sidewinder SW-X2 3D Printer if…
you value price and work area.
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.