Artillery Sidewinder SW-X2 3D Printer vs Prusa Research MINI+ Enclosure Bundle
Technical comparison · Fused filament fabrication (FFF/FDM)
Sidewinder SW-X2 3D Printer leads on the available specs (starting with work area); MINI+ Enclosure Bundle makes sense only for non-technical reasons (availability, support, ecosystem), or if the missing data matters in your case.
| Parameter |
Sidewinder SW-X2 3D Printer
Artillery
F2 · Intermediate
|
MINI+ Enclosure Bundle
Prusa Research
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2021 | 2020 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | ~250–320 € | 509 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | — | 38 × 33 × 38 cm |
| Weight (kg) | — | 4.5 kg |
| Work area (mm) | 300 × 300 mm | 180 × 180 mm |
| Z-axis height (mm) | 400 mm | 180 mm |
| Power (W) | — | 150 W |
| Voltage (V) | — | 230 V |
| Maximum speed | — | 200 mm/s |
| Declared precision | — | 0.05 mm |
| Category specs | ||
| Footprint X×Y (short side) (mm) | — | 180 mm |
| Build height Z (mm) | — | 180 mm |
| Kinematics | — | Cartesian |
| Max nozzle temperature (°C) | — | 280 °C |
| Max bed temperature (°C) | — | 100 °C |
| Max print speed (mm/s) | — | 180 mm/s |
| Enclosed chamber | — | False |
| Filament sensor | — | False |
| Auto bed leveling | — | Mesh |
| Standard nozzle diameter (mm) | — | 0.4 mm |
| Multi-extruder | — | False |
| Native Klipper | — | False |
| Input shaper | — | True |
| Multicolor printing | — | False |
| Multicolor requires accessory | — | True |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | Compatible with any slicer that generates standard G-code, such as Cura, PrusaSlicer, Simplify3D, IdeaMaker. The machine uses open-source Marlin 2.0 firmware with no proprietary locks. The communication protocol is standard USB serial, not GRBL, with profiles widely documented by the community. | PrusaSlicer, with pre-verified profiles for Input Shaper and Pressure Advance, is the reference software, but the machine accepts standard G-code from any compatible slicer, such as Cura or Simplify3D. Remote management runs through Prusa Connect, via Ethernet or the optional ESP Wi-Fi module. The firmware is open-source and runs on the 32-bit Buddy board, not GRBL, and is OTA-updatable: the Prusa ecosystem provides optimized profiles and regular updates, but doesn't restrict the use of alternative software. |
The differences that matter
- Work area: Sidewinder SW-X2 3D Printer 300×300 mm vs MINI+ Enclosure Bundle 180×180 mm — Sidewinder SW-X2 3D Printer wins (+178%)
- Price: Sidewinder SW-X2 3D Printer 285 € vs MINI+ Enclosure Bundle 509 € — Sidewinder SW-X2 3D Printer wins (+79%)
Which one to choose
Choose Sidewinder SW-X2 3D Printer if…
you value work area and price.
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.