S30 Ultra 33W vs S9 Laser Engraver
Comparación técnica · Láser de diodo (405–460 nm)
Tabella comparativa tra Sculpfun S30 Ultra 33W e Sculpfun S9 Laser Engraver basata sui dati tecnici ufficiali per la lavorazione Láser de diodo (405–460 nm).
| Parámetro |
S30 Ultra 33W
Sculpfun
F2 · Intermedio
|
S9 Laser Engraver
Sculpfun
F2 · Intermedio
|
|---|---|---|
| Identidad | ||
| Año de lanzamiento | 2023 | 2021 |
| Nivel de uso | F2 — Intermedio | F2 — Intermedio |
| Precio | ||
| Precio (€) | 1299.99 € | 259 € |
| Especificaciones universales | ||
| Dimensiones (An×P×Al) (cm) | 80 × 84 × 22 cm | 57 × 60 × 27 cm |
| Peso (kg) | — | 3 kg |
| Área de trabajo (mm) | 590 × 595 mm | 410 × 415 mm |
| Potencia (W) | 156 W | 30 W |
| Precisión declarada | 0.005 mm | 0.01 mm |
| Especificaciones de categoría | ||
| Área lado corto (mm) | 590 mm | 410 mm |
| Potencia láser nominal (W) | 33 W | 5.5 W |
| Tecnología fuente láser | diode | diode |
| Profundidad corte material | 20 mm (balsa wood), 15 mm (plywood), 15 mm (acrylic), 0.1 mm (steel) | Wood: 15mm, Acrylic: 10mm |
| Longitud de onda láser (nm) | 455 nm | 450 nm |
| Resolución mínima alcanzable (µm) | 5 µm | 10 µm |
| Sistema módulo autofocus | False | False |
| Módulo rotatorio incluido | False | False |
| Ranura pasaje estructural | False | — |
| Interfaz software control | ['lightburn', 'other'] | ['lightburn', 'other'] |
| Ecosistema | ||
| Dependencia del cloud | No | No |
| Notas de software | Compatible con LightBurn y LaserGRBL a través de conexión USB o Bluetooth. No requiere el uso de software propietario. | Totalmente compatible con LightBurn y LaserGRBL (solo Windows), operando a través de firmware GRBL estándar sin restricciones propietarias. |
MakerSpecs è un atlante indipendente. Non vendiamo prodotti: questo confronto rimanda alle due schede, dove trovi i dati completi e i link ufficiali.