4029CR CNC-Ready Lathe vs Micro Lathe II L1015ER
Technical comparison · Turning (lathe)
| Parameter |
4029CR CNC-Ready Lathe
Taig
F2 · Intermediate
|
Micro Lathe II L1015ER
Taig
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | ~1950–2050 € | ~500–600 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 60.96 × 78.74 × 35.56 cm | 39.37 × 41.91 × ? cm |
| Weight (kg) | 40.82 kg | — |
| Z-axis height (mm) | 152.4 mm | 228.6 mm |
| Power (W) | 186 W | — |
| Voltage (V) | 110 V | — |
| Maximum speed | 1800 rpm | 7000 rpm |
| Declared precision | 0.00508 mm | 0.0127 mm |
| Category specs | ||
| Swing over bed (mm) | 88.9 mm | 114.3 mm |
| Distance between centers (mm) | 152.4 mm | 247.65 mm |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The 4029CR ships without a controller or software: the control system integration is entirely the user's responsibility. It is compatible with common solutions in the Taig and DIY builder ecosystem, including Mach3, Mach4, and LinuxCNC, paired with NEMA 23 motor drivers (motor mounts are included). Software choice depends entirely on the control hardware selected. | The lathe is entirely manual with no software interface or CNC control. The unit ships with pulleys, a six-step belt and the power feed gearbox, but without a motor: the user must source a compatible 1750 RPM motor and, if needed, an external inverter for speed regulation. |
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.